| |
Volume 8,Issue 1,2016 Table of Contents
注射成型技术专题 | | | Application of Physical Visualization Technology in Polymer Molding Analysis | | | YANG Lei, JIANG Kai-yu and WANG Long-fei | | | Published 1月 10日, 2016 | | | 2016,8(1):1-6,36 [Abstract] [View PDF(5.27 M)] | | | | | Automatic Setting and Optimization of Injection Molding Process Parameters | | | ZHOU Hua-min, GAO Huang, ZHANG Yun and LI De-qun | | | Published 1月 10日, 2016 | | | 2016,8(1):7-13,26 [Abstract] [View PDF(4.67 M)] | | | | | Introduction to Stresses During Injection Molding Process | | | LI Hai-mei, LI Rui-bo, CHEN Jin-tao, ZHANG Ya-fei, CAO Fang-jie and LUO Fei | | | Published 1月 10日, 2016 | | | 2016,8(1):14-20 [Abstract] [View PDF(4.57 M)] | | | | | Progress in Polymer Foaming Mold | | | WANG Gang and CHEN Jing-bo | | | Published 1月 10日, 2016 | | | 2016,8(1):21-26 [Abstract] [View PDF(3.64 M)] | | | | | Material Modification，Processing and Application of PEEK | | | WANG Xin-yu, RUAN Shi-lun, CHANG Bao-ning, LIN Bu-yang and FANG Hai-dong | | | Published 1月 10日, 2016 | | | 2016,8(1):27-31,42 [Abstract] [View PDF(4.18 M)] | | | | | Polycarbonate Melt Rheological Characteristics and Evolutionary Regularity of Cavity Pressure in Compression Process | | | CAO Wei, ZHANG Shi-xun, WANG Tao, HUA Shao-zhen, LU Gui-xiang and SHEN Chang-yu | | | Published 1月 10日, 2016 | | | 2016,8(1):32-36 [Abstract] [View PDF(3.50 M)] | | | | | Effect of Organoclay on the Mechanical / Thermal Properties of Microcellular Injection Molded PBT-Clay Nanocomposites | | | Shyh-Shin HWANG, Hon-Jen SUNG and Song-Nian JHU | | | Published 1月 10日, 2016 | | | 2016,8(1):37-42 [Abstract] [View PDF(5.26 M)] | | | | | Study of Microstructure and Properties of Thermal Polyurethane Nanocomposite Foams | | | Xin-chao WANG and Yi-yan PENG | | | Published 1月 10日, 2016 | | | 2016,8(1):43-49,78 [Abstract] [View PDF(6.16 M)] | | | |
材料与成形性能 | | | Effect of Pressures on the Microstructures and Mechanical Properties of Al-5.0Cu-0.4Mn-0.1Ti-0.1RE-0.25V Alloy | | | MENG Fan-sheng, ZHANG Wei-wen, ZHAO Yu-liang, ZHANG Da-tong and YANG Chao | | | Published 1月 10日, 2016 | | | 2016,8(1):50-53,66 [Abstract] [View PDF(4.10 M)] | | | | | Effects of Hot Rolling Processes onMicrostructure and Mechanical Properties of AZ31 Magnesium Alloy | | | WU Jian-qi, YAN Yong-song, CHEN Qiang and WU Gui-lin | | | Published 1月 10日, 2016 | | | 2016,8(1):54-58,83 [Abstract] [View PDF(5.24 M)] | | | | | Time-dependent Springback Tests and the Finite Element Exploration of DP600 after Bending | | | FU Ze and E Da-xin | | | Published 1月 10日, 2016 | | | 2016,8(1):59-62,100 [Abstract] [View PDF(4.95 M)] | | | |
钢铁成形 | | | Analysis of Extrusion Forming of Aluminum Alloy Cone Component Based on Deform | | | CHEN Kai, YAN Yin-biao, XU Yue, ZHANG Bo, ZHAI Sheng-cai, REN Jin-yong, LIU Feng and LI Jing-chen | | | Published 1月 10日, 2016 | | | 2016,8(1):63-66 [Abstract] [View PDF(2.81 M)] | | | | | Research on Cold Extrusion Forming Process of Involute Inner Spline | | | LIU Guang-hui, LIU Hua, WANG Tao, SUN Hong-xing, LIU Bai-xuan and XU Wu-yang | | | Published 1月 10日, 2016 | | | 2016,8(1):67-72 [Abstract] [View PDF(4.31 M)] | | | | | Analysis of Geometry and Formation Conditions in Precision Forging Process of Chamber | | | HUANG Lei and FAN Li-xia | | | Published 1月 10日, 2016 | | | 2016,8(1):73-78 [Abstract] [View PDF(10.74 M)] | | | | | Effect of Deformation Parameters on Globularization Behavior of Titanium Alloy TC21 with Lamellar Microstructure | | | WAN Ya-chang, LI Xin, LU Shi-qiang and WANG Ke-lu | | | Published 1月 10日, 2016 | | | 2016,8(1):79-83 [Abstract] [View PDF(4.16 M)] | | | | | Coil Structure Optimization in Electromagnetic Powder Compacting Based on Particle Swarm（PSO）Algorithm | | | WANG Ying, HUANG Shang-yu, WANG Wei, LIAO Xing, ZHOU Meng-cheng and MENG Zheng-hua | | | Published 1月 10日, 2016 | | | 2016,8(1):84-90 [Abstract] [View PDF(7.20 M)] | | | | | A reasearch on the Section Quality of the Slitted Strips for Double-coil Welded Tubes | | | LIAN Fu-liang, LIANG Gao-fei, YAN Yuan-yuan and LI Yong-can | | | Published 1月 10日, 2016 | | | 2016,8(1):91-95,108 [Abstract] [View PDF(9.88 M)] | | | |
2024 | | | Study on the Performance of the Crash Beam Making through Hot Stamping Process | | | LYU Jia-hao and YING Yuan-song | | | Published 1月 10日, 2016 | | | 2016,8(1):96-100 [Abstract] [View PDF(3.46 M)] | | | | | Forming Process of Hot Shell Nosing of Cannonball Body Semiproduct | | | JIANG Chun-mao, LIU Hai-yan, FU Wei, WANG Jing-yu, FANG Xiao-ling, QIU Zhi-bin and DONG Zhi-xiu | | | Published 1月 10日, 2016 | | | 2016,8(1):101-105 [Abstract] [View PDF(4.26 M)] | | | | | Injection Molding Process of Arc Ball Set | | | LIU Hai-yan, LI Dong-hua, ZHANG Li-na, ZHENG Xu-dong, FU Wei, JIANG Chun-mao, LIU Yan and DONG Zhi-xiu | | | Published 1月 10日, 2016 | | | 2016,8(1):106-108 [Abstract] [View PDF(2.38 M)] | | | |
|
渝公网安备 50010702501719号