| |
| Research on the Slicing Technology of Rapid Prototyping based on STL Model |
| | CAI Dong-gen and ZHOU Tian-rui |
| | Published 11月 10日, 2012 |
| | 2012,4(6):1-4 [Abstract] [View PDF(2.60 M)] |
| | |
| The Numerical Simulation and Experimental Study of Cold Closed Die Forging Process of Planetary Gear |
| | QIAO Shuo, LIU Guo-kai, ZHOU Jie-kui and XUE Ke-min |
| | Published 11月 10日, 2012 |
| | 2012,4(6):5-8,109 [Abstract] [View PDF(4.79 M)] |
| | |
| Study on Deep Drawing of Cylindrical Cup by Floating-female Die with Independent Radial Pressure |
| | DING Ming-ming, SHI Yu-qing and HUANG Yong |
| | Published 11月 10日, 2012 |
| | 2012,4(6):9-11,33 [Abstract] [View PDF(3.49 M)] |
| | |
| Neck-spinning Process Research on Square Tube |
| | LI Ji-long, DU Chang-chun and LI Ping |
| | Published 11月 10日, 2012 |
| | 2012,4(6):12-15,135 [Abstract] [View PDF(4.92 M)] |
| | |
| Study of Optimizing Process Parameters during Annealing of Low Carbon Low Alloy Steel |
| | ZHAO Mao-yu and CHEN Qian-wang |
| | Published 11月 10日, 2012 |
| | 2012,4(6):16-21,60 [Abstract] [View PDF(7.19 M)] |
| | |
| Research on Closed Precision Forming Technology of Clutch Disc Hub |
| | ZHENG Guang-wen, LIU Wei and BAI Feng-mei |
| | Published 11月 10日, 2012 |
| | 2012,4(6):22-24 [Abstract] [View PDF(2.94 M)] |
| | |
| Optimization of the Forging Process for a Kind of Flange |
| | DING Jin-gen, XU Bao-guo and XU Hao |
| | Published 11月 10日, 2012 |
| | 2012,4(6):25-29,49 [Abstract] [View PDF(5.03 M)] |
| | |
| Analysis of Microstructure and Mechanical Properties of Q460E |
| | XU Ming-da, ZHOU Liu-hui, YU Jia-li, JIANG Guo-yu and E Ying-zi |
| | Published 11月 10日, 2012 |
| | 2012,4(6):30-33 [Abstract] [View PDF(4.37 M)] |
| | |
| Grey Prediction and Optimization of Forming and Densification for Cu Sintered Material in Tubes-twist Extrusion |
| | LI Yong-zhi and BAI Xiao-bo |
| | Published 11月 10日, 2012 |
| | 2012,4(6):34-37,122 [Abstract] [View PDF(3.82 M)] |
| | |
| Microstructure Characteristic of TC21 Alloy with Thermomechanical Treatment Process |
| | WANG Zheng, DONG Hong-bo and LING Zhi-wei |
| | Published 11月 10日, 2012 |
| | 2012,4(6):38-40,70 [Abstract] [View PDF(4.51 M)] |
| | |
| High Temperature Deformation Behavior and Flow Stress Model of Ti-3Al Based Alloy |
| | SHANG GUAN Shu-zhe, LI Xin, LU Shi-qiang and WANG Ke-lu |
| | Published 11月 10日, 2012 |
| | 2012,4(6):41-44,94 [Abstract] [View PDF(3.82 M)] |
| | |
| The Application of Cellular Automaton Method in Crack Healing Simulation |
| | MA Kai and ZHANG Xiao-xun |
| | Published 11月 10日, 2012 |
| | 2012,4(6):45-49 [Abstract] [View PDF(5.23 M)] |
| | |
| Design for Nozzle Precision Forging Technology and Die |
| | NIE Lan-qi and ZHOU Jing |
| | Published 11月 10日, 2012 |
| | 2012,4(6):50-52,77 [Abstract] [View PDF(3.38 M)] |
| | |
| Deform Application in Aeronautics and Astronautics Industry |
| | XU Xue-chun, HU Guang-hong and DONG Wan-peng |
| | Published 11月 10日, 2012 |
| | 2012,4(6):53-55,125 [Abstract] [View PDF(3.01 M)] |
| | |
| Die Forging Process Analysis and Mold Optimization of Crankshaft |
| | WANG Bo, LI Ming-yao, SUN Jing-song and MAO De-qing |
| | Published 11月 10日, 2012 |
| | 2012,4(6):56-60 [Abstract] [View PDF(4.41 M)] |
| | |
| Analysis on Drawing Process of the Front Cover of Brake Cylinder |
| | ZHANG Xiao-ming, ZHANG Jian-bao and WANG Li-jun |
| | Published 11月 10日, 2012 |
| | 2012,4(6):61-63 [Abstract] [View PDF(2.05 M)] |
| | |
| Present Status Analysis of China's Large-scale Free Forging Production |
| | YU Xing-juan, GUO Hang-feng, LU Jie and FENG Qiu-hong |
| | Published 11月 10日, 2012 |
| | 2012,4(6):64-67 [Abstract] [View PDF(2.51 M)] |
| | |
| Mold Design for Rotary-forging of Combined Semiaxle Flange |
| | CHEN Wen-tao, YANG Dong, WANG Xin-fang, CHEN Guo-qiang and CHEN Wen-lin |
| | Published 11月 10日, 2012 |
| | 2012,4(6):68-70 [Abstract] [View PDF(2.76 M)] |
| | |
| Study of Fabrication of Semi-solid Billet of 3A21 Aluminum Alloy |
| | WANG Xue, LI Ping and ZHU Guang-yu |
| | Published 11月 10日, 2012 |
| | 2012,4(6):71-77 [Abstract] [View PDF(10.73 M)] |
| | |
| Stamping Optimization by Combining Parameterization Technology and Numerical Simulation |
| | JI Liang-bo and LI Yong-zhi |
| | Published 11月 10日, 2012 |
| | 2012,4(6):78-81,84 [Abstract] [View PDF(3.89 M)] |
| | |
| SiCp/Al Composites Fabricated by High-pressure Torsion |
| | WANG Cheng-guo, LIN Li-jing, LIU Hong-li, WANG Li, XUE Ke-min and YUAN Bao-guo |
| | Published 11月 10日, 2012 |
| | 2012,4(6):82-84 [Abstract] [View PDF(3.51 M)] |
| | |
| Numerical Simulation on the Forging Process of Triple Valve |
| | SUN Gen-zhi |
| | Published 11月 10日, 2012 |
| | 2012,4(6):85-87,98 [Abstract] [View PDF(4.51 M)] |
| | |
| Simulation and Optimization on the Forming of Cylinder of Belt Pulley by Shovel Spinning Technology |
| | SHEN Guo-zhang, ZHAO Meng, TANG Ji-ping, QU Fang and XUE Ke-min |
| | Published 11月 10日, 2012 |
| | 2012,4(6):88-90 [Abstract] [View PDF(2.28 M)] |
| | |
| FEM Analysis of Pulley with Bidirectional Boss in Stamping-forging Hybrid Forming |
| | YAN Jun, GONG Zi-tian-zong and YUAN Bao-guo |
| | Published 11月 10日, 2012 |
| | 2012,4(6):91-94 [Abstract] [View PDF(3.09 M)] |
| | |
| Design on the Forming Process of the Bearing Cage |
| | LIANG Chen, KONG Yan and XUE Ke-min |
| | Published 11月 10日, 2012 |
| | 2012,4(6):95-98 [Abstract] [View PDF(3.47 M)] |
| | |
| On Calculation Formulas of Blank for Cone Type Necking Parts |
| | LU Xian-feng, PAN Ju-zhi and YANG An |
| | Published 11月 10日, 2012 |
| | 2012,4(6):99-102 [Abstract] [View PDF(2.71 M)] |
| | |
| Finite Element Analysis for 3D Electromagnetic Field of the Electromagnetic Clutch of Automotive Air-conditioning |
| | YANG Shan-wen, LI Ying and YUAN Bao-guo |
| | Published 11月 10日, 2012 |
| | 2012,4(6):103-106 [Abstract] [View PDF(3.56 M)] |
| | |
| Design of Progressive Die for Wiring Terminal |
| | CAI Dan-yun and DING Ming-ming |
| | Published 11月 10日, 2012 |
| | 2012,4(6):107-109 [Abstract] [View PDF(2.41 M)] |
| | |
| FEM Analysis of Stress and Strain Fields of Double Cylindrical Parts by Shovel Spinning Forming |
| | ZHAO Meng, SHEN Guo-zhang, GUO Fu-lin, LI Ying, LI Ping and YUAN Bao-guo |
| | Published 11月 10日, 2012 |
| | 2012,4(6):110-113 [Abstract] [View PDF(3.86 M)] |
| | |
| Study on Factors Influencing the Crack in Laser Cladding |
| | SHI Xiu-mei, YUAN Shu-qiang, YI Ying-hui and TANG Wei-hong |
| | Published 11月 10日, 2012 |
| | 2012,4(6):114-117 [Abstract] [View PDF(3.62 M)] |
| | |
| Finite Element Analysis and Structure Optimization of Hydraulic Support Prop Nest |
| | GONG Zi-tian-zong, LI Ping, XUE Ke-min and HUANG Pu |
| | Published 11月 10日, 2012 |
| | 2012,4(6):118-122 [Abstract] [View PDF(4.31 M)] |
| | |
| Design of a New Multihole Drilling Machine |
| | HE Qing-wei, YANG Dong, WANG Xin-fang, CHEN Guo-qiang and CHEN Wen-lin |
| | Published 11月 10日, 2012 |
| | 2012,4(6):123-125 [Abstract] [View PDF(2.93 M)] |
| | |
| The Optimal Design of the Cantilever based on Pro/E Software |
| | XIE Yu-min and LI Yong-zhi |
| | Published 11月 10日, 2012 |
| | 2012,4(6):126-128 [Abstract] [View PDF(2.38 M)] |
| | |
| The Punching Die Design of the Automobile End Cap |
| | KONG Yan, LIANG Chen, ZHAO Meng and NIE Ai-qin |
| | Published 11月 10日, 2012 |
| | 2012,4(6):129-131 [Abstract] [View PDF(2.11 M)] |
| | |
| Research on the Parametric Modeling of Involute Scroll based on UG |
| | LI Jun, WANG Jiong, TIAN Zhuang and XUE Ke-min |
| | Published 11月 10日, 2012 |
| | 2012,4(6):132-135 [Abstract] [View PDF(3.10 M)] |
| | |
渝公网安备 50010702501719号