| |
Volume 10,Issue 6,2018 Table of Contents
材料与成形性能 | | | Edge Effects of Laser Heat Induced Cone-shaped Forming of Aluminum Alloy Cross-Stiffened Integral Panel | | | YANG Li-jun, WANG Wei and FU Shou-chong | | | Published 11月 10日, 2018 | | | 2018,10(6):1-9 [Abstract] [View PDF(10.97 M)] | | | | | Determination of Constraint Factor and Representative Strain Introduced by Sharp Indentation on Titanium Alloy | | | JI Zhe, GAO Er-qing, SHEN Cheng-jin, SONG Qing-lei, XU Jie and GUO Tao | | | Published 11月 10日, 2018 | | | 2018,10(6):10-16 [Abstract] [View PDF(6.65 M)] | | | | | Boron Refining Mechanism of Pure Copper | | | HU Xin-fang, SHAO Ming-xing, HAN Xiao-xiao and WU Yu-ying | | | Published 11月 10日, 2018 | | | 2018,10(6):17-21 [Abstract] [View PDF(6.54 M)] | | | | | Research Progress on Dynamic Deformation Behavior and Brittle to Ductile Transition Mechanism of Low Density High Mn and Al Steels | | | WU Zhi-qiang, LU Li-wei and DING Hua | | | Published 11月 10日, 2018 | | | 2018,10(6):22-29 [Abstract] [View PDF(8.79 M)] | | | | | Test on Mechanical Properties of Glare Plate Based on Uniaxial Tensile | | | LANG Li-hui, ZHANG Yan-fei and GUAN Shi-wei | | | Published 11月 10日, 2018 | | | 2018,10(6):30-33 [Abstract] [View PDF(3.70 M)] | | | | | Effects of Heat Treatment Temperature on Corrosion Resistance of Amorphous Alloys | | | LIU Xiao-jiang, BU Wen-de and LIU Rong-guang | | | Published 11月 10日, 2018 | | | 2018,10(6):34-37 [Abstract] [View PDF(3.72 M)] | | | | | Effects of Heat Treatment on Performance of 34CrNiMo6 Steel | | | HOU Zheng-liang, WANG Zhu-fei, ZHANG Xue-dong, GUO Ju-shou and KANG Feng | | | Published 11月 10日, 2018 | | | 2018,10(6):38-42 [Abstract] [View PDF(5.76 M)] | | | | | Microstructures and Fracture Behaviors in Heavy Thick Multi-phase X80 Pipeline Steel | | | GAO Yan, JIANG Jin-xing, ZUO Xiu-rong, HONG Liang and WANG Hui-hui | | | Published 11月 10日, 2018 | | | 2018,10(6):43-48 [Abstract] [View PDF(11.69 M)] | | | | | Ability of Heterogeneous Nucleation in Substrate with Sharp Corners | | | LIU Qing-hui and LI Xiang-ming | | | Published 11月 10日, 2018 | | | 2018,10(6):49-56 [Abstract] [View PDF(6.12 M)] | | | |
钢铁成形 | | | Deep Drawing of Square Cup with Hybrid Segment-Blank-Holder Technique | | | MAO Yao-ben, KONG Xiao-hua, LI Xian-bin, YANG Le, WANG Ning and QIN Si-ji | | | Published 11月 10日, 2018 | | | 2018,10(6):57-64 [Abstract] [View PDF(5.72 M)] | | | | | Experimental Research on Laser Induced Precision Forming of U-shaped High-stiffener Integral Panel | | | LI Cai-ling, LAI Xiao-ming, WANG Bo, ZHANG Yu-liang, CUI Chao, SHEN Xiao-yu, WANG Shao-hua, FU Shou-chong and WANG Wei | | | Published 11月 10日, 2018 | | | 2018,10(6):65-68 [Abstract] [View PDF(3.33 M)] | | | | | Penetration Efficiency in Precision Radial Forging Penetration of Chamber | | | CHEN Yu-wen, HUANG Ling and FAN Li-xia | | | Published 11月 10日, 2018 | | | 2018,10(6):69-77 [Abstract] [View PDF(7.79 M)] | | | | | Effects of Different Forging Ratios and Q Values on Lateral Performance of Barrel | | | SHI Bi-kun, FAN Li-xia, YANG Yu-zhao and YANG Chen | | | Published 11月 10日, 2018 | | | 2018,10(6):78-82 [Abstract] [View PDF(5.68 M)] | | | | | Influence of Process Parameters on the Performance of Sheet Metal Double Point Incremental Forming Based on 3D Printing Support Die | | | WANG Xu, WANG Jin, JIN Ye-tang, ZHOU Peng, GU Ning and WANG Xin-tai | | | Published 11月 10日, 2018 | | | 2018,10(6):83-87 [Abstract] [View PDF(3.68 M)] | | | | | Casting Process Design around Aluminum Casting of Toppling Frame and Its Simulated Optimization | | | WANG Jia-cheng, QU Yuan-zhe, SHEN Chu-lun and YANG Yi-tao | | | Published 11月 10日, 2018 | | | 2018,10(6):88-94 [Abstract] [View PDF(16.97 M)] | | | | | Mechanism of Crack Generation in Pulsed Laser Welded Joint of Titanium/Aluminum Dissimilar Alloy | | | WU Xin-yong, LIAO Juan, XUE Xin and ZHAN Yan-ran | | | Published 11月 10日, 2018 | | | 2018,10(6):95-101 [Abstract] [View PDF(8.67 M)] | | | | | Electron Beam Deposition Repair Process of TC4 Titanium Alloy | | | LIU Rong-guang, BU Wen-de, LIU Xiao-jiang and KE Li-ming | | | Published 11月 10日, 2018 | | | 2018,10(6):102-106 [Abstract] [View PDF(4.72 M)] | | | | | Simulation Study on the Repair of Cracks in 5A90 Sheet by Current Treatment | | | LAI Xiao-ming, WANG Guo-feng, ZHANG Yu-liang, WANG Bo, GU Yi-bin, YI Zhuo-xun and WANG Shao-hua | | | Published 11月 10日, 2018 | | | 2018,10(6):107-111 [Abstract] [View PDF(4.81 M)] | | | | | Effects of Numerical Parameters on Winkling Simulation of TB5 Titanium Alloy Convex Flange | | | SUN Yong-na, WU Guo-qing, WAN Min and WU Xiang-dong | | | Published 11月 10日, 2018 | | | 2018,10(6):112-116 [Abstract] [View PDF(4.05 M)] | | | | | Microstructure and Mechanical Properties of Automotive Wheel Steel Friction Stir Welded Joints | | | DENG Huai-bo, CHEN Yu-hua, LI Shu-han and CHEN Chao | | | Published 11月 10日, 2018 | | | 2018,10(6):117-122 [Abstract] [View PDF(8.76 M)] | | | | | Tool Wear Mechanism of High Speed Drilling for Aramid Fiber Reinforced Plastic | | | YU Jie, LIN You-xi and FAN Yi-peng | | | Published 11月 10日, 2018 | | | 2018,10(6):123-127 [Abstract] [View PDF(5.36 M)] | | | |
2024 | | | Methods for Model Management and Transformation of Ship Integrated Design System | | | ZHANG Zhi-bing, DENG Jian-kun, MENG Fan-chong, LIU Yu-qi and KONG Hai-jiao | | | Published 11月 10日, 2018 | | | 2018,10(6):128-134 [Abstract] [View PDF(7.02 M)] | | | | | Research and Application of Laser Technology in the Manufacture of Filter Framework | | | GUO Yan-yan, LI Yu, QIN Li-yun, ZHANG Yan-qiao and ZENG Xiang-dong | | | Published 11月 10日, 2018 | | | 2018,10(6):135-141 [Abstract] [View PDF(5.11 M)] | | | | | Intellectual Property Right in Introdution of Titanium Alloy Technology | | | TANG Ping, ZHANG Yan-xia, CHEN Qin and CAO Hong-jin | | | Published 11月 10日, 2018 | | | 2018,10(6):142-149 [Abstract] [View PDF(5.88 M)] | | | |
|
渝公网安备 50010702501719号