| |
Volume 17,Issue 2,2025 Table of Contents
先进制造技术与装备A | | | Development Status and Prospect of Metal Sheet/Extrusion by Short Process Preparation Technology | | | DONG Lei, WANG Jian, SUN Shineng, REN Yuping | | | 2025,17(2):176-190 [Abstract] [View PDF(15.89 M)] | | | | | Influence of Double Forming Angle Based on Single Wedge Surface on One-time Rolling Forming of Large Cross-section Shafts | | | YAN Huajun, ZHAI Chen, ZHANG Jungai, DAI Xuerui, WANG Baoyu, LIU Jinping, ZHOU Xingbang, SHI Xiaomeng | | | 2025,17(2):191-199 [Abstract] [View PDF(6.98 M)] | | | | | Research Status and Development Trend of Forging Quality Prediction in Hot Working Process Based on Machine Learning | | | LIU Hongtao, ZHANG Rui, HU Zhili | | | 2025,17(2):200-218 [Abstract] [View PDF(18.19 M)] | | | | | Analysis and Optimization of Plastic Deformation during the Closing Process of Aviation 1/8-inch Countersunk Oil Nozzle | | | ZHANG Yang, HU Longwei, LUO Jie, WU Yinghong, MO Taiqian, XIAO Huaqiang, LIN Bo | | | 2025,17(2):219-227 [Abstract] [View PDF(21.15 M)] | | | | | Research on Machine Learning Based Prediction Model for Interface Bonding Characteristics of Thermoplastic/Metal Heterostructure | | | WANG Lingjun, SONG Kunlin, ZHANG Lijiao, ZHU Hongbin, LI Yan, WANG Zhenmin | | | 2025,17(2):228-237 [Abstract] [View PDF(11.91 M)] | | | |
轻合金成形 | | | Development and Optimization of Stamping Process of Front Cover Outer Plate of Auto-body Panel Prepared by Aluminum Alloys | | | XIA Hulin, LI Ming'ao, HE Changtao, ZHOU Tao, FAN Jie, WANG Weisheng, CAO Zhi, HU Li, YUAN Xiaowei | | | 2025,17(2):1-10 [Abstract] [View PDF(12.81 M)] | | | | | Deformation Law of ZL205A Arc Thin-walled Parts in Milling | | | LIU Jianxiang, XIN Zhijie, LU Huihu, SHEN Xingquan, LI Guodong, ZHAI Pengyuan | | | 2025,17(2):11-18 [Abstract] [View PDF(5.72 M)] | | | | | Co-simulation of Aging Forming and Axial Compression Load-bearing for Aluminum Alloy Integral Panel and Experimental Verification | | | TONG Canyu, WANG Yongmei, DU Juan, ZHAN Lihua, YANG Youliang, XU Yongqian, WANG Chen, XU Lingzhi | | | 2025,17(2):19-26 [Abstract] [View PDF(7.68 M)] | | | | | Deformation Behavior and Constitutive Model for Strain Compensation of Ultra-light LAZ933 Alloy | | | LIU Bin, LIU Liang, XUE Yong | | | 2025,17(2):27-35 [Abstract] [View PDF(6.58 M)] | | | | | Effect of Asymmetric Rolling on Microstructural Characteristics and Properties of AZ31B Mg/1060 Al Composite Plates | | | ZHANG Jiajia, ZHOU Ningjin, BO Lin'gang | | | 2025,17(2):36-43 [Abstract] [View PDF(15.35 M)] | | | | | Defect Control and Microstructure Properties of AlSi10Mg Alloy Formed by Selective Laser Melting with Laser Remelting | | | YU Tianshuo, HAN Yongquan | | | 2025,17(2):44-51 [Abstract] [View PDF(18.37 M)] | | | | | Mechanical Property Test and Simulation Analysis of Aluminum Alloy Adhesive Joint | | | YANG Qing, LI Xin, WANG Jiaxue, WANG Huafeng, KONG Dejia | | | 2025,17(2):52-61 [Abstract] [View PDF(9.91 M)] | | | |
钢铁成形 | | | Research and Development Status and Prospect of Welding Materials for 785 MPa Grade and above High Strength Steels | | | LIU Jingwu, ZHANG Lei, DU Yi, SUN Lei, WANG Xinghua, ZHANG Xiao, DONG Xing | | | 2025,17(2):62-75 [Abstract] [View PDF(26.72 M)] | | | | | Research on Hot Deformation Behavior of Corrosion Resistant Nitrided N63 Steel | | | LI Xinyang, HAN Shun, YANG Hao, WANG Chunxu, LI Yong, LI Liuyuan | | | 2025,17(2):76-84 [Abstract] [View PDF(7.87 M)] | | | | | Microstructure and Mechanical Properties of Laser Welded Joint of QP1180 Quenching-partitioning Steel | | | LI Wenjuan, WANG Jinfeng, SU Wenchao, GUO Yi, CHE Yajun, CAI Xiaoyu, WANG Hailin | | | 2025,17(2):85-93 [Abstract] [View PDF(10.83 M)] | | | | | Research and Control of Hot Deformation Internal Crack of S30432 Ultra Supercritical Boiler Tube | | | WU Gui, KANG Xitang, LI Peng, CHENG Yiming, TUO Leifeng, CHU Zhibing | | | 2025,17(2):94-101 [Abstract] [View PDF(18.21 M)] | | | | | Delaminating Cracks of Q690D Steel after Welding | | | YU Lijun, JI Qingtao, WU Chengfeng, ZHANG Xuedong, DU Chuankun, SHI Yuting | | | 2025,17(2):102-110 [Abstract] [View PDF(9.89 M)] | | | | | Investigation on Precision Blanking Process for 0.3 mm Thick Silicon Steel Sheets Used in Electric Motor Stator Cores | | | ZHENG Yanqi, LI Renxi, LI Xiong, WANG Zefei, MENG Yi | | | 2025,17(2):111-121 [Abstract] [View PDF(16.41 M)] | | | | | Influence of Heat Input of Submerged Arc Welding on Micro-structure and Properties of Q355B Thick Steel Welded Joint | | | SUN Yanfen, ZHU Tianyi, TIAN Songya | | | 2025,17(2):122-129 [Abstract] [View PDF(7.74 M)] | | | |
复合材料成形 铜合金成形 高温合金成形 | | | Effect of Pre-heat Treatment on Microstructure and Properties of GH4698 Alloy | | | JIANG Quanan, HUANG Liang, LI Zhonghao, BAN Yijie, GAO Shoulei | | | 2025,17(2):141-149 [Abstract] [View PDF(32.53 M)] | | | | | Processability and Microstructure Characteristics of AM247LC Alloy via Laser Powder Bed Fusion | | | HE Jian, QIAO Shen, WEI Dongyu, KONG Decheng, ZHOU Wenzhe, HUANG Wenmao, TAN Qingbiao, ZHU Guoliang | | | 2025,17(2):150-158 [Abstract] [View PDF(14.34 M)] | | | |
难熔金属成形
|
渝公网安备 50010702501719号