| |
Volume 16,Issue 6,2024 Table of Contents
聚合物及其复合材料精密成形 | | | Performance Enhancement Mechanism of Graphene Nanosheets/Melamine Composite Foam | | | ZHOU Ying, LIU Shimeng, ZHAO Jinchuan, WANG Chongda, SHEN Yijun, WANG Guizhen | | | 2024,16(6):1-11 [Abstract] [View PDF(18.59 M)] | | | | | Effect of Femtosecond Laser Parameters on the Structure and Anti-icing Performance of Silicone Rubber Surface | | | HE Binbo, JIANG Guo, YANG Can | | | 2024,16(6):12-23 [Abstract] [View PDF(15.34 M)] | | | | | Preparation of Hollow Glass Microsphere/TPU Composite Foam and Its Microporous Structure | | | LIANG Yixin, WANG Xinchao, LIU Jiajia, XIAO Hanchi, GENG Tie, Lih-Sheng，Turng | | | 2024,16(6):24-33 [Abstract] [View PDF(3.24 M)] | | | | | Material Characteristics and Service Performance of Automobile Thin-walled Bumper Skin | | | GUO Wei, HU Zongwen, FU Daxing | | | 2024,16(6):34-43 [Abstract] [View PDF(8.95 M)] | | | | | Preparation and Radiation Refrigeration Performance of MXene/CNF Composite Aerogels | | | JI Hongtu, FEI Yanpei, LI Gang, KUANG Tairong, MIN Zhiyu | | | 2024,16(6):44-52 [Abstract] [View PDF(16.62 M)] | | | | | Out-of-autoclave Curing Assisted by Rubber Pressurization | | | FANG Junwen, WANG Yi, GAO Zhuqing, HU Zhaocai, ZUO Xiaobiao, ZHOU Helezi, ZHOU Huamin | | | 2024,16(6):53-61 [Abstract] [View PDF(8.50 M)] | | | |
轻合金成形 | | | Microstructure and Properties of Commercial Pure Titanium TA1 Prepared by Binder Jet 3D Printing | | | XIAO Pan, CHEN Weiping, HUANG Liran, CHENG Taoqian, FU Zhiqiang | | | 2024,16(6):62-69 [Abstract] [View PDF(3.86 M)] | | | | | Effects of Peak Temperature and Cooling Rate on Microstructure and Properties in Heat-affected Zone of TC4 Titanium Alloy | | | YU Wenjun, ZHANG Chengzhu, ZHANG Qian, WANG Dongye, ZHU Zhenxin | | | 2024,16(6):70-76 [Abstract] [View PDF(2.12 M)] | | | | | Rolling Process of TC4 Alloy Oblique I-shaped Section Rings | | | YE Ning, WANG Longxiang, WANG Jianguo, XU Dong, SONG Baoyu | | | 2024,16(6):77-83 [Abstract] [View PDF(3.62 M)] | | | | | Laser Joining Characteristics of Aluminum Alloy/CFRTP Based on Laser Texturing | | | SONG Kunlin, QU Hua, ZHANG Tao, GU Shiwei, YANG Haifeng | | | 2024,16(6):84-91 [Abstract] [View PDF(3.29 M)] | | | | | Effect of Laser Power on the Microstructure and Properties of SiC Reinforced Aluminum Matrix Composites Formed by SLM Based on PLC Control | | | ZHANG Dajun, SONG Liming, LI Heng, XING Feng | | | 2024,16(6):92-99 [Abstract] [View PDF(9.40 M)] | | | |
钢铁成形 | | | Effect of Pulse Current on the Forming Accuracy of Microchannels in Ultra-thin 316L Plates | | | HAN Haolin, ZHANG Bao, LI Xifeng, ZU Yufei, FU Xuesong, ZHOU Wenlong, CHEN Guoqing | | | 2024,16(6):100-106 [Abstract] [View PDF(1.71 M)] | | | | | Process and Properties of Arc Cladding Ductile-hard Composite Layer | | | GUO Yi, WANG Jinfeng, SU Wenchao, CHE Yajun, CAI Xiaoyu, KE Hao, LI Wenjuan | | | 2024,16(6):107-114 [Abstract] [View PDF(1.37 M)] | | | | | Forming Limit at Blank Edge and In-plane Surface of QP and DP Steel | | | YUAN Zhipeng, NIU Chao, SHU Qicheng | | | 2024,16(6):115-121 [Abstract] [View PDF(3.66 M)] | | | | | Microstructure and Mechanical Properties of Laser Welded Joints of Duplex Stainless Steel with Different Strength Grades | | | TAN Hailin, LAI Chunming, ZHOU Jialin, MO Jinzhu, NIE Hui | | | 2024,16(6):122-128 [Abstract] [View PDF(14.29 M)] | | | | | Structure and Properties of Q345B/304 Dissimilar Steel Joint Using ER50-6 Welding Wire Laser Welding | | | LIU Hai, CHEN Hui | | | 2024,16(6):129-137 [Abstract] [View PDF(7.19 M)] | | | |
高温合金成形 | | | Flow Behavior and Constitutive Model of GH5188 Superalloy Sheet during Hot Tensile Deformation | | | WANG Miao, TENG Junfei, CHEN Yiqi, LI Hong | | | 2024,16(6):138-144 [Abstract] [View PDF(812.02 K)] | | | | | Microstructure and Properties of Cobalt-based Alloy Coatings on Nuclear Internal Components by Cladding | | | MI Dawei, BU Jiawei, GUO Baochao | | | 2024,16(6):145-152 [Abstract] [View PDF(15.06 M)] | | | | | Effect of Rare Earth Y on High-temperature Oxidation and Hot Corrosion Resistance Performance of Inconel 625 Alloy Fabricated by Laser Cladding | | | ZHU Kaiyang, GU Xianfeng, WANG Xiaoling, GUO Junfei, LI Ke, LUO Jiangling, YI Jianglong | | | 2024,16(6):153-163 [Abstract] [View PDF(7.98 M)] | | | |
铜合金成形 | | | Effect of Annealing Temperature on Microstructure and Properties of Cu-0.08Ag Alloy with Small Deformation | | | ZHU Yadan, TIAN Wenbin, QI Lin, CAI Jia, REN Yuping, LI Hongxiao, JIANG Min, QIN Gaowu | | | 2024,16(6):164-172 [Abstract] [View PDF(9.05 M)] | | | | | EBSD Analysis of Microstructure Evolution of Copper-containing Antibacterial Stainless Steel during Tensile Process | | | ZHAO Guanghui, GUO Shuqian, XUE Ziteng, WANG Jie, LI Juan, PEI Wenle | | | 2024,16(6):173-180 [Abstract] [View PDF(3.60 M)] | | | |
先进制造技术与装备 | | | Preparation and Mechanical Properties of AlSi10Mg Honeycomb Sandwich Tube by Selective Laser Melting | | | AN Zhiguo, ZHANG Zhiqiang, YE Liao | | | 2024,16(6):181-190 [Abstract] [View PDF(7.45 M)] | | | | | Analytical and Experimental Modeling of Extruded Width of Flat Elliptical Cross Section in Fused Deposition Molding | | | ZHANG Dehai, HUANG Zifan, LI Junmei, DING Liang | | | 2024,16(6):191-200 [Abstract] [View PDF(4.87 M)] | | | | | Forming Quality Analysis of Submerged Cavitation Jet of Microcapsule Robot Shells | | | LI Fuzhu, CHEN Shijian, WANG Yun, HE Peiyu, ZHU Cong, GUO Yuqin | | | 2024,16(6):201-208 [Abstract] [View PDF(10.53 M)] | | | |
|
渝公网安备 50010702501719号