| |
Volume 17,Issue 1,2025 Table of Contents
轻合金成形 | | | Numerical Simulation of 6005A Aluminum Alloy Friction Stir Welding Based on CEL Method | | | LI Ya'na, XIE Feifei, ZHANG Shengfang | | | 2025,17(1):1-8 [Abstract] [View PDF(9.28 M)] | | | | | High Temperature Oxidation Behavior of Mg-9Al-xCa Alloys | | | ZHAO Xinyi, ZHANG Haiyang, XIAO Yao, QIN Hong, LI Tianqing | | | 2025,17(1):9-16 [Abstract] [View PDF(11.72 M)] | | | | | Application of Cryogenic Air Minimum Quantity Lubrication Technology to TC6 Titanium Alloy Processing Characteristics | | | ZHANG Zhaoyuan, ZHANG Weikun, ZHANG Yaowu, ZHANG Xueni, LI Xingkai, JU Luyan | | | 2025,17(1):17-24 [Abstract] [View PDF(11.17 M)] | | | | | Heat Source Model and Temperature Field Simulation for Inclined Electron Beam Welding of High-strength Steel | | | GAO Yuehua, PENG Lichang, LIU Qipeng, XIONG Zhihao, WANG Shanlin | | | 2025,17(1):25-32 [Abstract] [View PDF(8.14 M)] | | | | | Constitutive Structure and Milling Surface Quality Prediction of TA11 Titanium Alloy | | | SHI Zhonglou, YANG Xiangjie | | | 2025,17(1):33-42 [Abstract] [View PDF(7.58 M)] | | | | | Design and Optimization of the Whole Hydro-mechanical Forming Process of Aluminum Alloy Profile-shaped Tube with Large Cross-section Change Rate | | | CHEN Ming, LIU Xin, XU Yong, XIE Wenlong, HUANG Xinyue, WANG Shengcheng, ZHAO Changjian, ZHANG Shihong | | | 2025,17(1):43-50 [Abstract] [View PDF(15.06 M)] | | | | | Curvature Radius and Springback of Magnesium Alloy Panel during Bending Forming | | | SONG Jian, WANG Zhongtang, LIANG Haicheng, LIU Quan, SHA Haibin | | | 2025,17(1):51-59 [Abstract] [View PDF(7.55 M)] | | | | | Effect of Holding Pressure on Subsequent Aging Behavior of 7075 Aluminum Alloy | | | CHEN Wenxuan, LI Bing, XU Feiyue, ZHANG Hongxia, XING Junfeng | | | 2025,17(1):60-67 [Abstract] [View PDF(11.66 M)] | | | | | Microstructure and Hot Deformation Behavior of Extruded Mg-Li-Al-Y-Zr-Gd-Nd Alloy | | | GAO Shiqing, WAN Yuanyuan, WANG Yanbin, LIU Peng, LI Ming, XING Zhihui, DU Chuanhang, XIA Xiangsheng | | | 2025,17(1):68-79 [Abstract] [View PDF(10.94 M)] | | | | | Influence of Shot Peening Medium on Surface Integrity of 7050-T7451 Aluminum Alloy | | | YANG Hui, JIA Baoguo, MA Le, ZHANG Xianjie, ZHANG Qi | | | 2025,17(1):80-86 [Abstract] [View PDF(7.18 M)] | | | |
钢铁成形 | | | Forming Properties and Microstructure of Copper-containing Austenitic Stainless Steel under Low Temperature Environment | | | WANG Jie, HAN Chuanlong, WANG Ruiyang, LI Juan, ZHAO Guanghui | | | 2025,17(1):87-96 [Abstract] [View PDF(32.96 M)] | | | | | Experiment Study of Clinching Joint Process with Pre-forming between DP980 Ultra-high Strength Steel and AA5052 Aluminum Alloy Sheet | | | ZHANG Shanyin, DENG Boran, HU Yuting, LU Xiaoxin, QIU Ping, XIAO Hong | | | 2025,17(1):97-106 [Abstract] [View PDF(8.72 M)] | | | | | Hot Deformation Behavior and Hot Working Diagram of 817 Gun Steel | | | ZHENG Zhichao, ZHANG Li, LIU Chengzhi, REN Jie, CHENG Shengwei, YANG Fei | | | 2025,17(1):107-116 [Abstract] [View PDF(11.89 M)] | | | | | Forming Characteristics of CMT Additive Single-pass Straight Wall of DP980 Dual Phase Steel | | | LIU Jiawang, LIU Yan, YAO Yu, LI Bo | | | 2025,17(1):117-126 [Abstract] [View PDF(13.61 M)] | | | | | Welding Residual Stress Test of X80 Oil Pipeline Girth Weld | | | GU Song, JIANG Guang, GU Ying, CHEN Xiangbin, KONG Chao, ZHANG Yu | | | 2025,17(1):127-133 [Abstract] [View PDF(5.60 M)] | | | | | Effect of Welding Heat Input on Microstructure and Mechanical Properties of Coarse-grained Heat Affected Zone in AH36 Steel Containing Different Nb Contents | | | PAN Nan, WANG Na, ZHAO Fu, ZHANG Yu | | | 2025,17(1):134-143 [Abstract] [View PDF(17.18 M)] | | | | | Effect of Microstructure Changes on Deformation Resistance of Silicon Steel in Electrically Assisted Forming | | | YE Ben, JIANG Baotao, ZHANG Bei, HU Feng, LI Lixin | | | 2025,17(1):144-152 [Abstract] [View PDF(22.51 M)] | | | |
复合材料成形 先进制造技术与装备 | | | Research Advances in Plastic Mechanism and Constitutive Modelling of Ultrasonic Vibration | | | ZHONG Bin, WANG Yuanlong, ZHANG Chuanwei, XIAO Li, XIE Jiahao | | | 2025,17(1):164-182 [Abstract] [View PDF(18.62 M)] | | | | | Application of the STL Model Visualization Techniques Based on WebGL in Foundry CAE System | | | LIU Jingfeng, LI Hongyou, JIAN Chongjun, YOU Fangyi | | | 2025,17(1):183-192 [Abstract] [View PDF(6.68 M)] | | | | | Multi-objective Optimization of GMAW Short-circuit Transfer Process Based on Weighted Principal Component Analysis | | | YE Yujie, CHEN Changrong, WANG Qianting, LIAN Guofu, LIANG Weikang | | | 2025,17(1):193-204 [Abstract] [View PDF(10.38 M)] | | | | | Microstructure and Properties of Plasma Arc Welding Gradient Materials by Additive Manufacturing | | | CHEN Zhengyu, FAN Jinrui, CAI Yigao, HUANG Chulan, WU Wei | | | 2025,17(1):205-213 [Abstract] [View PDF(34.01 M)] | | | | | Numerical Simulation of Planetary Frame Melt Molding Process | | | TONG Yuan, XU Zhe, CHEN Xuan, SU Liji, LIU Yulong, GONG Yufeng, JIAO Xin, CHEN Zheng | | | 2025,17(1):214-222 [Abstract] [View PDF(21.10 M)] | | | | | Underwater ACFM Weld Defect Detection System for Spent Fuel Pool in Nuclear Power Plant | | | SHEN Guangyao, ZHANG Xiaochun, ZHU Jialei, LI Congwei, TIAN Zhenglei | | | 2025,17(1):223-231 [Abstract] [View PDF(19.99 M)] | | | |
|
渝公网安备 50010702501719号