文章摘要
TiAl合金气雾化制粉及热等静压成形研究进展
Research Progress in Gas Atomization and Hot Isostatic Pressing of TiAl Alloy
  
DOI:10.3969/j.issn.1674-6457.2022.11.005
中文关键词: 粉末冶金  TiAl合金  气雾化  热等静压  近净成形
英文关键词: powder metallurgy  TiAl alloy  gas atomization  hot isostatic pressing  near net shaping
基金项目:国家重点研发计划(2021YFB3700502)
Author NameAffiliation
LIU Yu-feng Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials,AECC, Beijing 100095 
ZHANG Guo-qing Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials,AECC, Beijing 100095 
LIU Na Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials,AECC, Beijing 100095 
LI Zhou Advanced High Temperature Structural Materials Laboratory, Beijing Institute of Aeronautical Materials,AECC, Beijing 100095 
Hits: 1650
Download times: 928
中文摘要:
      概述了TiAl合金气雾化制粉及热等静压成形的主要研究成果。在TiAl合金粉末制备方面,重点介绍了气雾化制粉工艺、粉末粒度控制、粉末氧含量控制和粉末组织特征。针对热等静压技术,介绍了TiAl合金粉末热等静压致密化过程及机理,总结了采用热等静压近净成形工艺制备TiAl合金转捩片的研究成果。结合粉末冶金TiAl合金研究进展,提出了未来TiAl合金粉末制备及成形技术的发展方向。
英文摘要:
      The research progress of gas atomization and hot isostatic pressing (HIPing) of TiAl alloy was reviewed. The gas atomization technologies, particle size and oxygen content control factors, microstructure of TiAl alloy powders were introduced. Densification process and mechanism of TiAl alloy powders via hot isostalic pressing was also established. TiAl alloy transition part formed by HIPing near net shaping were summarized. Further research direction of PM TiAl alloy was addressed.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the512473visitor    渝ICP备15012534号-6

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号