|
| 锁孔TIG焊接技术的研究进展 |
| Research Progress of Keyhole TIG Welding Technology |
| Received:May 12, 2020 Revised:July 10, 2020 |
| DOI：10.3969/j.issn.1674-6457.2020.04.001 |
| 中文关键词: 锁孔TIG焊 焊接波形控制 快频脉冲焊接 |
| 英文关键词: keyhole TIG welding welding waveform control interpulse welding |
| 基金项目:国家自然科学基金（51875212）；广东省科技计划（2018A030313192，2019B090919002）；广州市国际合作项目（201807010035，2019070110006）；深圳市技术攻关重点项目（JSGG20191118102201716） |
| Author Name | Affiliation | | WU Jian-wen | 1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China | | CHEN Hao-yu | 1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China | | GAO Yang | 2. Anshan Court Roll Surface Treatment Co., Ltd., Anshan 114021, China | | FAN Wen-yan | 1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China
3. Guangzhou Inspection and Quarantine Technology Center, Guangzhou 510623, China | | YAN De-jun | 4. CSSC Huangpu Wenchong Shipbuilding Company Limited, Guangzhou 510715, China | | RAO Yu-zhong | 4. CSSC Huangpu Wenchong Shipbuilding Company Limited, Guangzhou 510715, China | | WANG Zhen-min | 1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China |
|
| Hits: 4111 |
| Download times: 3144 |
| 中文摘要: |
| 锁孔TIG焊接技术具有不开坡口、单面焊双面成形的特点，尤其适用于中厚板焊接。首先介绍了锁孔TIG焊的基本原理，然后分析了目前锁孔TIG焊接波形控制技术的研究现状，主要包括恒流锁孔TIG焊、单脉冲锁孔TIG焊和高低频双脉冲锁孔TIG焊。针对现有锁孔TIG焊接技术存在热输入量过大、接头组织晶粒粗大等缺点，重点介绍了一种新型的快频脉冲TIG焊接技术，它通过快频脉冲电流产生的电磁场对电弧进行压缩，控制焊接过程的热输入量，达到提高焊接质量的目的。与传统脉冲电弧相比，快频脉冲电弧的收缩效果更为明显，可细化焊接接头组织，将快频脉冲焊接技术应用于锁孔TIG焊是今后研究的热点和主要发展方向。 |
| 英文摘要: |
| The keyhole TIG welding has the feature of one-side welding with back formation and without groove. It is especially suitable for welding plates of moderate thickness. This paper first introduced the basic principle of keyhole TIG welding, and then analyzed the research status of the current general keyhole TIG welding waveform control technologies, including constant current keyhole TIG welding, single pulse keyhole TIG welding and high and low frequency double pulse keyhole TIG welding. In view of the shortcomings of keyhole TIG welding technology, such as too much heat input and coarse grain of joint structure, a new type of interpulse TIG welding technology was mainly introduced. It controlled the heat input in the welding process by compressing the arc with the electromagnetic field generated by the interpulse current, so as to improve the welding quality. Compared with the traditional pulse, the interpulse arc has obvious shrinkage effect which can refine the structure of welded joint. The application of interpulse welding waveform to keyhole TIG welding is the hot spot and main development direction in the future. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|
渝公网安备 50010702501719号