|
| 金属薄板循环塑性强化模型及实验研究进展 |
| Research Progress of Cyclic Plastic Hardening Model and Experiment for Metal Sheets |
| Received:April 21, 2019 Revised:May 10, 2019 |
| DOI：10.3969/j.issn.1674-6457.2019.03.003 |
| 中文关键词: 循环强化模型 循环加载实验 参数识别 回弹预测 |
| 英文关键词: cyclic hardening model cyclic loading test parameter identification springback prediction |
| 基金项目:国家自然科学基金（51605018，51875027） |
|
| Hits: 4103 |
| Download times: 3427 |
| 中文摘要: |
| 金属薄板塑性成形及回弹预测精度在很大程度上取决于所采用的强化模型能否对材料变形行为准确描述。梳理了各向同性强化模型、随动强化模型、旋转强化模型、畸变强化模型以及各类微观强化模型，对不同模型的特点及局限性进行了分析。同时，总结并讨论了标定强化模型中材料参数的各类循环加载实验方法。针对强化模型参数识别的问题，总结了常用的参数标定方法，分析了影响识别精度的因素。最后，介绍了不同强化模型在回弹预测方面的应用并分析了影响预测精度的因素。 |
| 英文摘要: |
| The accuracy of plastic forming and springback prediction of metal sheet greatly depends on whether the hardening model can accurately describe the deformation behavior of the material. The isotropic hardening models, kinematic hardening models, rotational hardening models, distortional hardening models and various microscopic hardening models were summarized, and their characteristics and limitations were analyzed. Various cyclic tests for material parameters in the hardening model were summarized and discussed. Targeted to the parameter identification of hardening model, commonly used parameter identification methods for hardening models were summarized, and the factors affecting the identification accuracy were analyzed. Finally, the application of the hardening model in springback prediction was introduced and the factors affecting the prediction result were analyzed. |
|
View Full Text
View/Add Comment Download reader |
| Close |
渝公网安备 50010702501719号