文章摘要
TiNi合金表面轧制氧化膜激光清洗工艺研究
Laser Cleaning Process of TiNi Alloy Surface Rolling Oxide Film
Received:July 09, 2018  Revised:September 10, 2018
DOI:10.3969/j.issn.1674-6457.2018.05.022
中文关键词: 激光清洗  TiNi合金  氧化膜
英文关键词: laser cleaning  TiNi alloy  oxide film
基金项目:国家自然科学基金(51565040)
Author NameAffiliation
SUN Song-wei Department of Welding Engineering, Nanchang Hangkong University, Nanchang 330063, China 
CHEN Yu-hua Department of Welding Engineering, Nanchang Hangkong University, Nanchang 330063, China 
CHEN Wei Department of Welding Engineering, Nanchang Hangkong University, Nanchang 330063, China 
WANG Li-tao Department of Welding Engineering, Nanchang Hangkong University, Nanchang 330063, China 
Hits: 4454
Download times: 2840
中文摘要:
      目的 针对焊前去除TiNi合金表面致密氧化膜过程中,传统方法会造成环境污染的问题,运用激光清洗这一绿色清洗方法去除TiNi形状记忆合金表面轧制氧化膜,并对其清洗工艺进行研究。方法 运用OM和XRD等分析测试手段对激光清洗后TiNi合金表面进行测试,研究激光清洗工艺对TiNi合金表面氧化膜及其组织的影响。结果 激光清洗参数对激光清洗效率影响较大,扫描次数对TiNi合金激光清洗效率具有饱和性;激光清洗过后的TiNi合金表面仍存在一定含量的TiO, TiO2, Ti3O5等氧化物。结论 激光清洗可得到表面明亮且均匀的TiNi合金,但不能完全清除TiNi合金表面氧化膜。
英文摘要:
      In allusion to the problem that the traditional method for removing the dense oxide film on the surface of TiNi shape memory alloy might cause environmental pollution, the paper aims to remove the dense oxide film on the surface of TiNi shape memory alloy through laser cleaning and research the cleaning method. The surface of TiNi alloy after laser cleaning was tested by OM, XRD and other analytical testing methods to research effects of laser cleaning process on the oxide film and its microstructure on TiNi alloy surface. Parameters of laser cleaning had great effects on the cleaning efficiency. The scanning times had saturation to the laser cleaning efficiency of TiNi alloy. There was still a certain amount of TiO, TiO2 on the surface of TiNi alloy after laser cleaning. TiNi of bright and uniform surface might be obtained by laser cleaning, but laser cleaning cannot completely remove the oxide film on TiNi alloy surface.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the783932visitor    渝ICP备15012534号-4

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号