文章摘要
微小型齿轮片连续冲、修工艺
Continuous Punching-Finishing Process of Micro-Miniature Gear Pieces
Received:April 12, 2017  Revised:May 10, 2017
DOI：10.3969/j.issn.1674-6457.2017.03.010
中文关键词: 微小型齿轮片  冲、修工艺  坯、料复位  机加铣齿
英文关键词: micro-miniature gear pieces  punching-finishing process  blank-material back locating  gear machining
基金项目:
Author NameAffiliation
LIU Han-xiong Northwest Industrial Group Co., Ltd., Xi'an 710043, China 
WANG Ruo Northwest Industrial Group Co., Ltd., Xi'an 710043, China 
LI Xiang-hua Northwest Industrial Group Co., Ltd., Xi'an 710043, China 
Hits: 4675
Download times: 3703
中文摘要:
      目的 以冲压代替机加，提高零件加工的良品率和加工效率。方法 用模具进行连续冲、修加工。结果 生产效率提高1倍，零件加工良品率提高20%，生产成本下降25%。结论 用模具进行连续冲、修可以代替机加铣齿加工，为微小型齿轮片的加工开辟了一条新的途径。
英文摘要:
      The paper aims to replace machining with stamping to improve the quality and efficiency of the parts processing. Continuous stamping and finishing were carried out for dies. The productivity was doubled; the quality of the parts was improved by 20%; and the production cost was reduced by 25%. Replacing gear machining with continuous stamping and finishing of dies develops a new way for the processing of micro-miniature gear pieces.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the505377visitor    渝ICP备15012534号-6

>Copyright：Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code： Phone：Fax： Email:

>    

渝公网安备 50010702501719号