文章摘要
MIG堆(钎)焊某弹弹带工艺研究
MIG (Bead) Braze Welding Process of Bearing Band for a Certain Bomb
Received:April 20, 2017  Revised:May 10, 2017
DOI:10.3969/j.issn.1674-6457.2017.03.009
中文关键词: MIG钎焊  弹带  弹带工艺
英文关键词: MIG braze welding  bearing band  bearing band process
基金项目:
Author NameAffiliation
PAN Ling North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
JIANG Chun-mao North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
ZHAO Dong-sheng North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
SUN Jia-li North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
LIU Hai-yan North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
HE Bing-sen North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
WANG Qiu-yu North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
LIU Yu North Hua’an Industrial Group Co., Ltd., Qiqihar 161046, China 
Hits: 4634
Download times: 3565
中文摘要:
      为解决传统的压带、收带等工艺方式对大、中口径薄壁弹带合件加工时,加工难度大、废品率高、材料利用率低等问题,开展某弹弹带MIG(钎)焊工艺研究,形成较好的工艺技术规范,完成焊接小批量试制、理化分析、剪切试验及动态考核试验。焊接后的弹带合件满足产品图样和制造与验收规范要求,材料利用率、良品率得到大幅度提高,解决了大、中口径炮弹弹带焊接难题。结果表明该薄壁弹带合件MIG焊工艺加工方式可行,为新型弹种的研制开发奠定了基础。
英文摘要:
      This paper aims to solve problems such as high processing difficulty, high rejection rate, low stock utilization, etc. in processing large and medium diameter thin walled bomb with traditional technology on band press and recovery, through technical study on MIG braze welding of bearing band of a certain bomb, to form favorable technical specifications, complete the trial welding , physicochemical analysis, shear test and dynamic test of a small batch. The bearing band assembly after the welding met the requirements of product drawing and manufacturing and acceptance specification. The material utilization ratio and the yield of the product were greatly improved. It is feasible for the MIG welding process of the thin walled bearing band, which lays the foundation for research and development of the new type bomb.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the505626visitor    渝ICP备15012534号-6

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号