|
| 带轴齿轮坯闭式精锻成形数值模拟与实验研究 |
| Numerical Simulation and Experimental Study on Closed Precision-forging for Shaft Gear Billet |
| Received:July 31, 2016 Revised:September 10, 2016 |
| DOI：10.3969/j.issn.1674-6457.2016.05.022 |
| 中文关键词: 带轴齿轮坯 闭式精锻 有限元模拟 |
| 英文关键词: shaft gear billet closed precision-forging finite element simulation |
| 基金项目:合肥工业大学秋实计划项目（JZ2015QSJH0218） |
|
| Hits: 4350 |
| Download times: 3510 |
| 中文摘要: |
| 目的 研究带轴齿轮坯闭式温精锻成形的工艺过程。 方法 根据零件结构特点，制订合理的成形方案，利用有限元分析软件对其闭式精锻成形过程进行模拟分析，并开展相应物理实验对模拟结果进行验证。 结果 通过模拟获得了齿轮坯成形过程中的等效应力分布、 等效应变分布、 金属流动规律、温度分布和载荷变化等，实验制得符合要求的锻件，与模拟结果基本吻合。 结论 闭式温精锻工艺制得了符合尺寸要求的齿轮坯锻件，该工艺方案可行，模拟结果准确可靠，对实际生产有一定指导作用。 |
| 英文摘要: |
| To study the closed precision-forging for shaft gear billet, a reasonable forming process was defined according to the special structure of the gear billet. The simulation analysis of closed precision-forging process was carried out by finite element analysis software. Corresponding physical experiment was carried out to validate the simulation results. Effective stress and strain distribution, metal flow pattern, temperature distribution and load change in the forming process were obtained through finite element simulation. The product made in experiment met the requirements and approximately agreed with the simulation results. In conclusion, gear billet made by closed warm precision-forging process meets the dimensional requirements. Therefore the process scheme is feasible. The simulation results are accurate and reliable and have a certain guiding function for actual production. |
|
View Full Text
View/Add Comment Download reader |
| Close |
渝公网安备 50010702501719号