文章摘要
不同变形方式下稀土微合金化 7085 铝合金的组织与性能研究
Effect of Rare Earth Metals on Microstructure and Properties of 7085 Aluminum Alloy under Different Deformations
Received:January 07, 2016  Revised:March 10, 2016
DOI:10.3969/j.issn.1674-6457.2016.02.002
中文关键词: 7085铝合金  稀土元素  轧制  多向锻造  显微组织  力学性能
英文关键词: 7085 aluminum alloy  rare earth metals  rolling  multi-axial compression  microstructure  mechanical properties
基金项目:教育部科学技术研究重大资助项目 (311025)
Author NameAffiliation
XU Hao Hefei University of Technology Hefei 230009 China 
CHEN Wen-lin Hefei University of Technology Hefei 230009 China 
GAO Yan Hefei University of Technology Hefei 230009 China 
Hits: 4845
Download times: 3637
中文摘要:
      目的 研究不同的变形方式下, 添加微量稀土元素 Sc 的 7085 铝合金(Al-7.5Zn-1.5Mg-1.4Cu-0.15Zr) 的组织与性能。方法 7085铝合金中加入0.15%的稀土元素Sc, 采用轧制和多向锻造两种方法使其变形, 最后用慢应变速率拉伸试验、 光学显微、 硬度和电导率测试等分析方法, 研究变形后, Sc元素对7085铝合金显微组织和力学性能的影响。结果 与未加入Sc元素的7085铝合金相比, 7085-Sc合金的晶粒明显细化, 在两种变形方式下, 经过固溶和T6时效处理后, 7085-Sc合金的显微硬度分别提高了21.4%和8.9%, 抗拉强度分别提高了10.8%和5.4%, 电导率略有降低。结论 微量稀土元素对7085铝合金有着明显的细化晶粒作用, 并且能大幅提高其综合性能。
英文摘要:
      Microstructure and properties of 7085 aluminum alloy with 0.15wt% rare earth metals Sc were investigated. Add minor of rare earth metals Sc to 7085 aluminum alloys,they were then through two different deformation such as rolling and multi-axial compression,finally effect of rare earth metals on microstructure and mechanical properties of 7085 aluminum alloy were investigated by slow strain rate testing, optical microscope hardness and electrical conductivity test. Compared to aluminum alloy without rare earth metals, minor addition of rare earth metals could obviously refine the grains, under two deformations and aging treatment, the alloy exhibited a higher hardness and strength, they were improved 21.4% and 8.9% , especially 10.8% and 5.4%. And the electrical conductivity was slightly lower. Minor addition of rare earth metals could obviously refine the grains of 7085 aluminum alloy and improve its properties.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the787302visitor    渝ICP备15012534号-4

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号