|
| 分块压料与板坯形状对 St16 钢板矩形盒拉深成形性的影响 |
| Influence of Segmented Blank Holder and Blank Shape on the Drawing Forming Property of Rectangular Case of St16 Steel Blank |
| Received:June 28, 2015 Revised:September 10, 2015 |
| DOI：10.3969/j.issn.1674-6457.2015.05.021 |
| 中文关键词: 模具 矩形盒件 拉深 eta / DYANFORM 分块压料 板坯形状 |
| 英文关键词: mold rectangular case drawing eta / DYANFORM segmented blank holder blank shape |
| 基金项目:国家自然科学基金(51175044) |
|
| Hits: 4261 |
| Download times: 3417 |
| 中文摘要: |
| 目的 研究 St16 钢板矩形盒拉深的成形性能。 方法 在 St16 冷轧薄板进行单轴拉伸试验的基础上,利用有限元软件 eta / DYNAFORM,分析了分块变压料力控制技术与优化板坯形状两种工艺方案对矩形盒拉深成形性的影响。 结果 分块变压料力与优化板坯形状均可以提高矩形盒的极限拉深深度,且优化板坯形状的效果更好。 两种方案的综合应用能大幅度地提高矩形盒件的拉深性能。 结论 通过改善法兰变形流动情况,可以大幅度提高矩形盒拉深成形性,为确定成形工艺和模具设计制造提供参考。 |
| 英文摘要: |
| The aim of this work was to study the drawing forming property of rectangular case of St16 steel blank. Based on a series of quasi-static uniaxial tensile test of St16 steel plates, eta / DUNAFORM was used to analyze the influence of two kinds of process programs on the drawing forming property of rectangular case, including segmented blank holder with variable force control technology and optimizing blank shape. Both methods could improve the limit drawing depth of rectangular case, moreover, the effect of optimizing blank shape was better. Integrated application of these two programs could greatly improve the drawing property of rectangular case. In conclusion, the drawing forming property of rectangular case could be greatly enhanced by ameliorating the flange flow condition, providing reference for determination of the forming process as well as mould designing and manufacturing. |
|
View Full Text
View/Add Comment Download reader |
| Close |
渝公网安备 50010702501719号