|
| 多台阶深筒形件成形工艺设计及仿真 |
| The Forming Process Designing and Simulation of Multi-step Deep Cylindrical Part |
| Received:February 09, 2013 Revised:June 01, 2013 |
| DOI：10.3969/j.issn.1674-6457.2013.04.008 |
| 中文关键词: 阶梯筒形件 拉深 工艺设计 仿真 |
| 英文关键词: stepped cylindrical part drawing process design simulation |
| 基金项目: |
| Author Name | Affiliation | | ZHANG Jin-peng | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | CHEN Wen-lin | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | ZHOU Yu-chen | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | ZHOU Rui | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | YANG Dong | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China |
|
| Hits: 4836 |
| Download times: 4124 |
| 中文摘要: |
| 根据塑性成形理论分析、计算确定某电器产品的阶梯圆筒件成形工艺,并建立有限元模型,实现多道次拉深过程的仿真。 最后对仿真结果进行分析和试验验证。 |
| 英文摘要: |
| This paper calculates and determines the forming process of the stepped cylindrical piece of an electrical product based on the theoretical analysis of plastic forming. Then this paper implements the simulation of deep drawing process using the finite element model of multi-channel. Finally, it give the analysis with the results of simulation and experimental verification. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|
渝公网安备 50010702501719号