|
| 高强钢复杂曲面件充液拉深工艺模拟研究 |
| Simulation Research of Sheet Hydroforming Process for High Strength Steel Complex Surface Part |
| Received:June 08, 2011 Revised:May 10, 2012 |
| DOI： |
| 中文关键词: 高强钢 充液拉深 液室加载路径 最高液室压力 |
| 英文关键词: high strength steel sheet hydroforming hydraulic pressure loading path maximum hydraulic pressure |
| 基金项目: |
| Author Name | Affiliation | | CHEN Long | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | ZHANG Chao | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | CAO Ting-ting | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China | | LI Ping | School of Material Science and Engineering, Hefei University of Technology, Hefei 230009, China |
|
| Hits: 4218 |
| Download times: 3462 |
| 中文摘要: |
| 对某高强钢复杂曲面件的充液拉深工艺进行有限元数值模拟，分析了液室加载路径以及最高液室压力对成形结果的影响，得到该零件充液拉深成形合理的液室加载路径及最高液室压力。 |
| 英文摘要: |
| The sheet hydroforming process of high strength steel complex surface part is investigated by numerical simulation. Influence of hydraulic pressure loading path and the maximum hydraulic pressure on the forming results is analyzed. Reasonable hydraulic pressure loading path and the maximum hydraulic pressure of hydroforming process are got for this part. |
|
View Full Text
View/Add Comment Download reader |
| Close |
渝公网安备 50010702501719号