|
| 小型H型钢斜轧孔型工艺的全轧程有限元模拟分析 |
| Simulation of Incline Rolling Groove for Small H-beam in Full Rolling Process |
| Received:October 10, 2011 Revised:November 10, 2011 |
| DOI： |
| 中文关键词: 小型H型钢 斜轧孔型 有限元法 数值模拟 |
| 英文关键词: small size H-beam incline rolling groove finite element method simulation |
| 基金项目: |
| Author Name | Affiliation | | GUO Xing-ye | School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China | | ZHU Guo-ming | School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China | | LV Chao | School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China | | ZHANG Si-xun | Laiwu Iron & Steel Co., Ltd., Laiwu 274404, China | | WANG Zhong-xue | Laiwu Iron & Steel Co., Ltd., Laiwu 274404, China | | LIU Fu-ning | Laiwu Iron & Steel Co., Ltd., Laiwu 274404, China | | KANG Yong-lin | School of Material Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China |
|
| Hits: 4250 |
| Download times: 3530 |
| 中文摘要: |
| 采用显示动力学有限元模拟软件LS-Dyna，对某钢厂的小型H型钢的完全轧制过程进行模拟仿真分析。重点分析了有限元模型建立过程中单元的选择、网格的划分、材料模型的构建和前处理边界条件的设定；通过数值模拟分析得到了该型号H型钢的全轧程各道次的应力应变状态，并分析了金属的流动和轧制过程中金属的充型状态，为小型H型钢的轧制工艺的制定和孔型设计提供了参考。 |
| 英文摘要: |
| Based on dynamic explicit finite element method and with software LS-Dyna, the full rolling process of small size H-beam was simulated. The choosing of elements type, the construction of the element nets, material model and the boundary condition were introduced in detail. The stress and strain status was derived from the calculation, and the current status of the iron and the metal filling condition were analyzed. This paper provides reference for the technology planning and the roller pass designing of H-beam rolling. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|
渝公网安备 50010702501719号