文章摘要
基于热加工图的铝合金6061变形行为研究
Research on the Deformation Behavior of 6061 Aluminum Alloy Based on Processing Map
Received:October 10, 2011  Revised:November 10, 2011
DOI:
中文关键词: 铝合金6061  动态材料模型  功率耗散图
英文关键词: 6061 aluminum  dynamic materials mode  processing map
基金项目:国家科技重大专项课题(2011ZX04016-051)
Author NameAffiliation
GUO Hai-ting Huazhong University of Science and Technology, Wuhan 430074, China 
DENG Lei Huazhong University of Science and Technology, Wuhan 430074, China 
WANG Xin-yun Huazhong University of Science and Technology, Wuhan 430074, China 
Hits: 4062
Download times: 4010
中文摘要:
      在Zwick/Roell Z020万能材料试验机上实施高温压缩试验,研究铝合金6061在变形温度范围为360~480 ℃,应变速率在0.001~1 s-1时的热变形行为。基于动态材料模型理论,利用matlab进行三次样条插值,获取足够的数据利用origin软件绘制铝合金6061的功率耗散图。利用功率耗散图分析确定了试验参数范围内热变形过程的最佳工艺参数。在加工温度为360~440 ℃,应变速率为0.001~0.01 s-1之间,功率耗散率的最大值为0.39,是该合金的最佳成形区域。
英文摘要:
      The deformation behavior of 6061 aluminum alloy was investigated by hot-compression test on Zwick/Roell Z020 Universal test machine.The test was performed in the temperature range between 360 ℃ to 480 ℃ and strain rate between 0.001 s-1 to 1 s-1. By cubic spline interpolation in matlab, the processing map was calculated and analyzed according to dynamic materials mode(DMM).The optimum processing parameters of hot deformation in the range of this experiment could also be obtained by the map.Temperature between 360 ℃ to 440 ℃ and strain rate between 0.001 s-1 to 0.01 s-1 is the most suitable area for processing, and the power dissipation factor is up to 0.39 in this area.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the509775visitor    渝ICP备15012534号-6

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号