文章摘要
Monel K-500合金加热性能测试
Study on Heating Performance of Monel K-500 Alloy
Received:March 03, 2011  Revised:July 10, 2011
DOI：
中文关键词: Monel K-500  加热性能  过烧现象
英文关键词: Monel K-500  heating performance  burning phenomenon
基金项目:
Author NameAffiliation
CHEN Wen-zhang School of Material Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China 
ZHANG Xiao-ping School of Material Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China 
ZHENG Xiao-hua School of Material Science and Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China 
Hits: 3956
Download times: 3126
中文摘要:
      针对目前国内Monel K-500合金热加工生产中存在的问题，采用不同的加热速度对其加热性能进行了试验测试研究。研究结果表明，采用相对较快的加热速度时，铸坯表面并未出现明显的过烧现象，而且总的加热时间较短，因此对Monel K-500合金铸坯采用较快的加热速度，可以有效提高生产效率。
英文摘要:
      In view of its existing heat working problems in domestic production , different heating velocity has been used to test its performance in the experiment. The results show that a relatively fast heating rate has not lead to a significant over-burning phenomenon on the slab surface, and the total heating time is shorter. Therefore, Monel K-500 alloy billet with a faster heating rate can improve production efficiency.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the503835visitor    渝ICP备15012534号-6

>Copyright：Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code： Phone：Fax： Email:

>    

渝公网安备 50010702501719号