|
| 基于ANSYS的高频板真空挤压机结构优化 |
| Structure Optimization of the High Frequency Laminate Vacuum Extruder Based on ANSYS |
| Received:January 04, 2011 Revised:May 10, 2011 |
| DOI： |
| 中文关键词: 真空挤压机 高频板 机身 有限元 |
| 英文关键词: vacuum extruder high frequency laminate frame FEM |
| 基金项目: |
| Author Name | Affiliation | | HU Yang-hu | School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China | | ZHAO Sheng-dun | School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China | | YANG Da-an | School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China | | WANG Yue-hu | School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China | | WU Bing-jin | School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China |
|
| Hits: 4032 |
| Download times: 3129 |
| 中文摘要: |
| 建立了24 000 kN-24B高频板真空挤压机的三维模型，基于有限元理论对24 000 kN-24B高频板真空挤压机机身受载后的力学性能等进行了分析研究，得出了存在较大变形和较大等效应力集中的部位，对结果进行分析并提出了相应改进措施。 |
| 英文摘要: |
| The 3D modeling of 24 000 kN-24B high frequency laminate vacuum extruder was established, then the stress distortion and mechanical properties of the 24 000 kN-24B high frequency laminate vacuum extruder was investigated based on finite element method(FEM) in the present work. The areas of the larger deformation and equivalent stess were found.By discussing the results, optimization and improved measurements were proposed based on the analysed results. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|
渝公网安备 50010702501719号