文章摘要
注塑件出现质量问题的原因与防止措施
Injection Molding Quality Flaw and Improvement Measure
Received:November 25, 2010  Revised:March 10, 2011
DOI：
中文关键词: 注塑件质量  注塑成形工艺  注塑成形模具  质量改进
英文关键词: injection molding quality  injection molding technology  injection molding mold  quality improvement
基金项目:
Author NameAffiliation
YANG Hai-peng Jiangmen Polytechnic, Jiangmen 529090, China 
Hits: 4723
Download times: 4580
中文摘要:
      针对塑料原材料、塑料件结构、注塑成形工艺条件、注塑模具、注塑设备等方面，对注塑件出现质量问题的原因进行了分析，并提出了预防和改进措施，提高了注塑件质量，降低了生产成本。
英文摘要:
      The causes of injection molding quality flaw are analysed from plastic raw materials, the plastic structure, the injection molding technological conditions, mold, equipment etc.. Improvement measures are proposed. Thus the quality of injection molding parts is improved and the production cost is reduced.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the787664visitor    渝ICP备15012534号-4

>Copyright：Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code： Phone：Fax： Email:

>    

渝公网安备 50010702501719号