文章摘要
振动时效法在薄壁铸件上的应用
Application of the Vibration-ageing in Thin-walled Casting
Received:December 14, 2009  Revised:January 10, 2010
DOI:
中文关键词: 薄壁铸件  振动时效  残余应力  微塑性变形
英文关键词: thin-walled casting  vibration-ageing  residual stress  micro plastic deformation
基金项目:
Author NameAffiliation
NING Hai-qing 1.No.59 Institute of China Ordnance Industry, Chongqing 400039, China2.National Defence Research and Application Center of Precision Plastic Forming Technology, Chongqing 400039, China 
ZHAO Zu-de 1.No.59 Institute of China Ordnance Industry, Chongqing 400039, China2.National Defence Research and Application Center of Precision Plastic Forming Technology, Chongqing 400039, China 
HUANG Shu-hai 1.No.59 Institute of China Ordnance Industry, Chongqing 400039, China2.National Defence Research and Application Center of Precision Plastic Forming Technology, Chongqing 400039, China 
KANG Feng 1.No.59 Institute of China Ordnance Industry, Chongqing 400039, China2.National Defence Research and Application Center of Precision Plastic Forming Technology, Chongqing 400039, China 
HU Chuan-kai 1.No.59 Institute of China Ordnance Industry, Chongqing 400039, China2.National Defence Research and Application Center of Precision Plastic Forming Technology, Chongqing 400039, China 
Hits: 3974
Download times: 3047
中文摘要:
      介绍了振动时效法消除残余应力的机理以及在薄壁铸件上的应用。通过对振动时效工艺参数,包括激振点、支撑点、激振频率、激振力和激振时间等的分析,优化出了薄壁铸件的振动时效工艺。振动时效后薄壁铸件残余应力降低35%以上,应力分布得到了均化,同时与热时效相比,节约工艺成本70%以上,大大地缩短了处理时间。
英文摘要:
      The mechanism of vibration stress relief (VSR) and its application in the thin-walled casting were introduced. VSR process parameters including vibration excitation point, support point, excitation frequency, excitation force, excitation time and so on, were analyzed to optimize the process of vibration-aging. After VSR the residual stress reduced above 35%.The stress distribution became more homogeneous. Compared with the heat aging, VSR saved the process cost above 70% and reduced the process time.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the507164visitor    渝ICP备15012534号-6

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号