| |
Volume 2,Issue 4,2010 Table of Contents
高熵合金和非晶合金成形 | | | Study on Hot Compression Deformation of Mg-10Gd-2Y-0.6Zr Alloy and its Microstructure | | | SHU Da-yu, XIAO Yuan-lun, HU Chuan-kai, KANG Feng, HUANG Shu-hai, LING Hai-qing and ZHAO Zu-de | | | Published 7月 10日, 2010 | | | 2010,2(4):1-6 [Abstract] [View PDF(8.85 M)] | | | | | Study of Equal Channel Angular Pressing and Twist | | | WANG Xue, WU Zhan-li, XU Ying-qiang and XUE Ke-min | | | Published 7月 10日, 2010 | | | 2010,2(4):7-11 [Abstract] [View PDF(8.43 M)] | | | | | Study of Mathematic Model of Cold Rolling Force | | | WU Jing-wei and CAI Yu-qiang | | | Published 7月 10日, 2010 | | | 2010,2(4):12-14,26 [Abstract] [View PDF(2.78 M)] | | | | | Simulation and Experimental Study in HPT Process of Sintered Aluminum Cone | | | LI Da, ZHANG Kai and LI Ping | | | Published 7月 10日, 2010 | | | 2010,2(4):15-17 [Abstract] [View PDF(3.53 M)] | | | | | Forecast and Control of the Spring-back of Spherical-cymbal Transducer's End-caps in Free-bulging | | | WU Shi-lin, ZHANG Qi and HUANG Zhi-ping | | | Published 7月 10日, 2010 | | | 2010,2(4):18-22 [Abstract] [View PDF(3.88 M)] | | | | | Simulation Study on Improvement of Molybdenum Powder Warm Compaction Process by HPT | | | ZHANG Kai, LI Xiao, LI Ping, WANG Gang and ZHANG Bin-bin | | | Published 7月 10日, 2010 | | | 2010,2(4):23-26 [Abstract] [View PDF(3.52 M)] | | | | | Analysis of Color Rapid Prototyping Workpiece Shading Error | | | WANG Xiang-wei | | | Published 7月 10日, 2010 | | | 2010,2(4):27-31,56 [Abstract] [View PDF(5.64 M)] | | | | | Fabrication of Semi-solid Billet of Aluminum Alloy 3A21 based on New SIMA Method | | | ZHU Guang-yu, XUE Ke-min, LI Ping and XUE Chuan-mei | | | Published 7月 10日, 2010 | | | 2010,2(4):32-35 [Abstract] [View PDF(7.00 M)] | | | |
综 述 2024 | | | Research on Temperature Distribution in Multi-directional Forging Process for Blade with a Damper Platform | | | WANG Yu, LIU Yu-li, YANG He and GUO Qiang | | | Published 7月 10日, 2010 | | | 2010,2(4):48-51 [Abstract] [View PDF(3.99 M)] | | | | | Cold-close Precision Forging of Half Axle Bevel Gear with Big Modulus Based on Divided Flow Method | | | WANG Gang-chao, WANG Gang, SHI Wen-chao and XUE Ke-min | | | Published 7月 10日, 2010 | | | 2010,2(4):52-56 [Abstract] [View PDF(5.97 M)] | | | | | The Technology and Die of the Solid Forming of Chain Wheel | | | MENG Ling-xian, ZHANG Zhi-hong, LIU Bai-xuan, LIU Zhong-ming, ZHANG Li-yong, ZHANG He-ping and ZHANG Yuan-guo | | | Published 7月 10日, 2010 | | | 2010,2(4):57-59,75 [Abstract] [View PDF(2.84 M)] | | | | | Numerical Simulating of the Stamping Forming Process of Auto Left-front Door's Anti-collision Beam | | | XU Ke, LI Ping, CAO Ting-ting and XUE Ke-min | | | Published 7月 10日, 2010 | | | 2010,2(4):60-63,71 [Abstract] [View PDF(4.52 M)] | | | | | Design of Multi-position Progressive Die for Connecting Piece | | | WANG Xin | | | Published 7月 10日, 2010 | | | 2010,2(4):64-66 [Abstract] [View PDF(3.19 M)] | | | | | Wedge Piercing Die | | | YU Wen-sheng, NIE Lan-qi and WANG Fa-chun | | | Published 7月 10日, 2010 | | | 2010,2(4):67-71 [Abstract] [View PDF(3.99 M)] | | | | | Analysis on the Fracture Failure of 45 Steel Automobile Stabilizing Rod | | | WANG Hui and MEI Hua-sheng | | | Published 7月 10日, 2010 | | | 2010,2(4):72-75 [Abstract] [View PDF(12.71 M)] | | | | | Necking Process and Die Design of Shell Bodies | | | NIE Lan-qi and WANG Fa-chun | | | Published 7月 10日, 2010 | | | 2010,2(4):76-79 [Abstract] [View PDF(2.63 M)] | | | | | Design of the Injection Mould for Electric Cooker Shell | | | WU Shi-qi | | | Published 7月 10日, 2010 | | | 2010,2(4):80-82,88 [Abstract] [View PDF(3.71 M)] | | | | | Improvement of Inside and Outside Flanging Mould of the Sealed Cover | | | GUO Wei, NIE Lan-qi and WANG Fa-chun | | | Published 7月 10日, 2010 | | | 2010,2(4):83-85 [Abstract] [View PDF(2.35 M)] | | | | | Improvement of the Process Technology of Balance Block's Deep Hole | | | SHANG Ceng and WANG Shao-yu | | | Published 7月 10日, 2010 | | | 2010,2(4):86-88 [Abstract] [View PDF(2.09 M)] | | | |
|
渝公网安备 50010702501719号