Volume 16,Issue 11,2024 Table of Contents

   
Other Issues:  
  

2024先进镁合金材料

Effect of Mn on the Microstructure and Properties of Mg-Al Alloys of Different Purity
  WU Xiong, LIU Hongxu, JING Xuerui, SHE Jia, TANG Aitao, ZHANG Dingfei, ZHANG Jianyue
  2024,16(11):1-9 [Abstract]  [View PDF(9.16 M)]
  
Effect of Pre-torsion on very High Cycle Fatigue Properties of Extruded AZ31 Alloy
  XU Ao, SHI Rui, SHI Baodong
  2024,16(11):10-18 [Abstract]  [View PDF(5.99 M)]
  
Microstructure Evolution and Deformation Mechanism of AZ91 Magnesium Alloy during Ultrasonic Vibration Compression
  XU Ziyue, LIU Huan, LEI Hao, JIANG Jinghua, MA Jiang
  2024,16(11):19-27 [Abstract]  [View PDF(22.49 M)]
  
Effect of Rolling Process on Microstructure and Properties of Mg-1.5Mn-0.3Ce Alloy
  ZHANG Yuan, LIU Wei, LI Jingren, LI Shuo, SONG Jie, ZHU Chang, JIANG Haoxin, PAN Hucheng, QIN Gaowu
  2024,16(11):28-37 [Abstract]  [View PDF(7.33 M)]
  
Particle Impact Behavior and Coating Organization Evolution Mechanism in AC-HVAF Thermal Sprayed Al-based Coatings on Magnesium Alloy Surfaces
  LI Xining, FANG Min, YAN Zhaoming, ZHANG Zhimin
  2024,16(11):38-46 [Abstract]  [View PDF(19.95 M)]
  
Interface Bonding in Mg/Al Composite Plates Prepared by Differential Temperature Asynchronous Rolling
  LEI Junyi, JIAO Fengtao, LIU Cong, JIA Weitao, JIANG Lianyun, MA Lifeng, JIANG Zhengyi
  2024,16(11):47-56 [Abstract]  [View PDF(29.56 M)]
  
Crack Propagation Mechanism of {10-12}-{10-12} Secondary Twin Induced Fatigue Fracture during Fatigue Deformation of AZ31 Magnesium Alloy
  YAN Yuqin, LI Mengzhi, YOU Yunxiang, WANG Yizhi, HUANG Xingyu, TAN Li, ZHOU Tao
  2024,16(11):57-64 [Abstract]  [View PDF(6.58 M)]
  
Effect of Strain Rate on Microstructure and Mechanical Properties of Hard Plate Rolled AZ31 Magnesium Alloy
  HU Diao, MA Min, CHEN Xi, LIU Yang, LIU Longfei
  2024,16(11):65-74 [Abstract]  [View PDF(8.43 M)]
  
Prediction of Corrosion Potential of Rolled AZ31 Magnesium Alloy Sheet Based on Machine Learning
  XIE Chaolin, TANG Changping, LIU Xiao, ZHU Biwu, MA Lili, WEI Fuan, LIU Wenhui, XU Congchang, LI Luoxing
  2024,16(11):75-81 [Abstract]  [View PDF(1016.71 K)]
  

钢铁成形

Effects of Annealing-tempering and Tempering-annealing Processes on Microstructure and Mechanical Properties of Cold-rolled 10Mn Steel
  BAI Shaobin, SHENG Jian, LI Dazhao, LU Haitao, CHEN Yongan, ZHAO Zhenyu, XING Jia
  2024,16(11):82-90 [Abstract]  [View PDF(16.14 M)]
  
Simulation Research on Hot Rolling Behavior of HB400/HG70 Bimetallic Machinery Steel
  RAO Yongpeng, JIANG Jixun, QIN Fangcheng, QI Huiping, ZHANG Lianming
  2024,16(11):91-99 [Abstract]  [View PDF(7.63 M)]
  
Experimental Investigation on the Effect of Blanking Process on Tensile Properties of UHSS Edge
  LI Ya, LIU Yuanyuan, LIAN Changwei
  2024,16(11):100-107 [Abstract]  [View PDF(13.23 M)]
  
Arrhenius Constitutive Model for Hot Deformation of DP1180 Steel
  GAO Xingjian, LIU Xin, LUO Jian, WANG Wenli
  2024,16(11):108-116 [Abstract]  [View PDF(914.07 K)]
  

轻合金成形

Model Prediction of Dimensional Accuracy of LPBF TA15 Titanium Alloy Based on GWO-SVR
  ZENG Qingnan, WANG Zhuojian, CHAI Xiangdong
  2024,16(11):117-125 [Abstract]  [View PDF(1.94 M)]
  
Hot Deformation Behavior, Microstructure and Properties of As-cast Ti-47Al-2Cr-2Nb Alloy
  HU Zhijun, ZHANG Jiaheng, HU Zhili, PANG Qiu
  2024,16(11):126-134 [Abstract]  [View PDF(28.39 M)]
  
Microstructure Regulation and Mechanical Properties of TC4 Titanium Alloy by Wire Arc Additive Manufacturing
  WANG Yike, LI Renhua, CHEN Yuhua, XU Mingfang, CHEN Wei
  2024,16(11):135-143 [Abstract]  [View PDF(28.72 M)]
  
Effect of Solid Solution Temperature and Holding and Quenching Time on the Microstructure and Properties of 7075 Aluminum Alloy Plates
  LI Bing, CHEN Wenxuan, ZHANG Hongxia, XU Feiyue, XING Junfeng
  2024,16(11):144-150 [Abstract]  [View PDF(6.36 M)]
  

高熵合金和非晶合金成形

Effect of Annealing on Microstructure and Mechanical Properties of Al0.1CoCrFeNi High Entropy Alloy
  QIN Xuwei, WANG Shouwu, CHEN Yuhua, ZHANG Shiyi, ZHANG Timing, WU Yebin, ZENG Zhuo
  2024,16(11):151-159 [Abstract]  [View PDF(5.15 M)]
  

先进制造技术与装备

Microstructure and Mechanical Properties of Reflow Solder Joints Prepared by CNTs Reinforced Sn-Bi Composite Solder
  HUANG Qing, PENG Qianqun, ZHANG Wenyan, MAO Yuqing
  2024,16(11):160-167 [Abstract]  [View PDF(2.81 M)]
  
Obstacle Avoidance Path Planning of Welding Robot Arm Based on ABSS-ARRT Algorithm
  SONG Yanli, ZHANG Shulei, SONG Kang, WANG Xuchu, LIU Yujian, SU Jianjun, YANG Lin
  2024,16(11):168-177 [Abstract]  [View PDF(3.66 M)]
  
Effect of Deflection Magnetic Field Intensity on Heat Transfer and Flow of Arc and Molten Pool in Arc Deposition
  LI Mei, YANG Shengbo, LI Lijun, ZHOU Xiangmanb
  2024,16(11):178-188 [Abstract]  [View PDF(24.13 M)]
  
Finite Element Analysis and Process Optimization of Precision Wire Mesh Drawing
  JIN Shangye, NI Xiaohua
  2024,16(11):189-195 [Abstract]  [View PDF(1.18 M)]
  
Effect of Ultrasonic Atomization on Line Width and Morphology of Aerosol Printing Patterns
  LIU Yingjie, ZHANG Yuanming, YUAN Shunteng, DU Mingchen, ZOU Haibin
  2024,16(11):196-202 [Abstract]  [View PDF(1.44 M)]
  

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the517664visitor    渝ICP备15012534号-6

>Copyright:Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code: Phone:Fax: Email:

>    

渝公网安备 50010702501719号