文章摘要
周芃,李可然,胡飞,等.添加Be对CoCrFeNi高熵合金组织和性能影响的研究[J].精密成形工程,2022,14(12):41-49.
ZHOU Peng,LI Ke-ran,HU Fei,et al.Effect of Adding Be on Microstructure and Properties of CoCrFeNi High Entropy Alloy[J].Journal of Netshape Forming Engineering,2022,14(12):41-49.
添加Be对CoCrFeNi高熵合金组织和性能影响的研究
Effect of Adding Be on Microstructure and Properties of CoCrFeNi High Entropy Alloy
  
DOI:10.3969/j.issn.1674-6457.2022.12.005
中文关键词: 高熵合金  Be元素添加  微观组织结构  力学性能
英文关键词: high entropy alloy  Be addition  microstructure  mechanical property
基金项目:武汉市知识创新专项?基础研究项目;国家自然科学基金(51601063)
作者单位
周芃 华中科技大学 分析测试中心武汉 430074 
李可然 华中科技大学 材料科学与工程学院材料成形与模具技术国家重点实验室武汉 430074 
胡飞 华中科技大学 材料科学与工程学院材料成形与模具技术国家重点实验室武汉 430074 
时天骄 华中科技大学 材料科学与工程学院材料成形与模具技术国家重点实验室武汉 430074 
龚攀 华中科技大学 材料科学与工程学院材料成形与模具技术国家重点实验室武汉 430074 
摘要点击次数: 1790
全文下载次数: 756
中文摘要:
      目的 研究CoCrFeNi高熵合金组织和性能在添加Be后的变化,通过高熵合金固溶体相形成规律,设计从面心立方固溶体转变至含体心立方及金属间化合物的(CoCrFeNi)1-xBex系列高熵合金。方法 通过计算验证(CoCrFeNi)1-xBex系列高熵合金的成分是否落入固溶体区域,并对上述成分高熵合金组织和力学性能进行研究。结果 Be元素的原子数分数为4%时,高熵合金仍为单一的FCC相结构,随着Be元素含量的进一步增加,基体中出现BCC相和金属间化合物。Be的添加使得(CoCrFeNi)1-xBex高熵合金的屈服强度及显微硬度均大大提高,同时密度降低。结论 根据相形成规律设计的(CoCrFeNi)1-xBex系列高熵合金表明,适量添加Be元素可以改善CoCrFeNi高熵合金的综合物理力学性能。
英文摘要:
      The work aims to study the microstructure and properties of CoCrFeNi high entropy alloys (HEA) with Be addition. The (CoCrFeNi)1-xBex series of high entropy alloys were designed to transform from face-centered cubic solid solution to body-centered cubic and intermetallic compounds based on the formation law of high entropy alloy solid solution phase. The components of the (CoCrFeNi)1-xBex series high entropy alloys were calculated to verify whether they fell into the solid solution region, and the microstructure and mechanical properties of (CoCrFeNi)1-xBex series high entropy alloys were studied. When the content of Be was 4at.%, the HEAs had a single FCC phase structure. With the increase of Be content, BCC phase and intermetallic compounds appeared in the matrix. The yield strength and microhardness of (CoCrFeNi)1-xBex HEAs were increased and the density was decreased with the addition of Be. In summary, the addition of Be improved the comprehensive mechanical properties of CoCrFeNi HEA.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第14783033位访问者    渝ICP备15012534号-4

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

    

渝公网安备 50010702501719号