窦程亮,柳旭,黄晓猛,等.不同加工成形方法对银靶微观组织性能的影响[J].精密成形工程,2022,14(10):34-39.
DOU Cheng-liang,LIU Xu,HUANG Xiao-meng,et al.Effect of Different Processing Methods on Microstructure Properties of Silver Target[J].Journal of Netshape Forming Engineering,2022,14(10):34-39. |
| 不同加工成形方法对银靶微观组织性能的影响 |
| Effect of Different Processing Methods on Microstructure Properties of Silver Target |
| |
| DOI：10.3969/j.issn.1674-6457.2022.10.005 |
| 中文关键词: 锻造 轧制 纯银靶材 晶粒 |
| 英文关键词: forging rolling sterling silver target grain |
| 基金项目:国家科技部“科技助力经济2020”重点专项 |
|
| 摘要点击次数: 1877 |
| 全文下载次数: 874 |
| 中文摘要: |
| 目的 研究锻造和轧制两种不同加工成形方法对银靶微观组织的影响，解决纯银靶材内部晶粒粗大、分布不均匀的问题。方法 采用锻造和轧制方法分别对纯银靶材铸锭进行加工，通过对微观组织的观察和测试分析，研究两种不同加工方法对银靶微观组织的影响。结果 锻造加工的纯银靶材致密性更好;轧制加工的纯银靶材在冒口处存在大量缺陷。锻造加工的纯银靶材晶粒细小且分布均匀;轧制加工的纯银靶材晶粒较粗大、分布均匀性差，存在部分粗大晶粒。锻造加工的纯银靶材硬度值(73HV0.05)明显高于轧制加工的纯银靶材(55HV0.05)。结论 在晶粒细化及分布均匀性方面，锻造比轧制加工纯银靶材更具优势。 |
| 英文摘要: |
| The work aims to study the effect of forging and rolling on the microstructure of silver target, and solve the problem of coarsening and uneven distribution in sterling silver target. Sterling silver target ingots were processed by forging and rolling, respectively. The effect of two different processing methods on the microstructure of silver target was studied by observing, testing and analyzing the microstructure of silver target. The results show that the compactness of forged sterling silver target is better, while there were many defects in the riser of the rolled sterling silver target. Forged sterling silver target has fine grain size and uniform distribution, while the grain size of rolled sterling silver target is coarse and the distribution uniformity is poor, and there are some coarse grains. The hardness value of forged sterling silver target is 73HV0.05,which is significantly higher than the rolled sterling silver (55HV0.05). Forging has more advantages in grain refinement and grain distribution uniformity than rolling when processing sterling silver target. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号