赵永刚.注塑成型制品翘曲变形优化建模分析[J].精密成形工程,2022,14(3):154-157.
ZHAO Yong-gang.Optimization Modeling of Warpage Deformation of Injection Molded Products[J].Journal of Netshape Forming Engineering,2022,14(3):154-157. |
| 注塑成型制品翘曲变形优化建模分析 |
| Optimization Modeling of Warpage Deformation of Injection Molded Products |
| 投稿时间：2021-06-04 |
| DOI：10.3969/j.issn.1674-6457.2022.03.020 |
| 中文关键词: Moldflow 注塑 成型 制品 翘曲变形 |
| 英文关键词: Moldflow injection molding forming products warpage deformation |
| 基金项目:郑州地方高校教育教学改革工程项目(ZZJG-A9012) |
|
| 摘要点击次数: 1730 |
| 全文下载次数: 943 |
| 中文摘要: |
| 目的 针对传统建模方法在预测的翘曲变形位置与实际偏差较大的问题，开展基于Moldflow的注塑成型制品翘曲变形优化建模分析研究。方法 通过数据模拟分析预处理、浇注体系模型构建、基于Moldflow的注塑成型制品翘曲变形过程模拟等手段，实现对注塑成型制品曲面参数优化。结果 通过对比实验证明，新的建模方法与传统建模方法相比预测翘曲变形位置偏差更小，预测结果更准确。结论 在实际应用中，该建模方法能够辅助塑件加工厂提升注塑成型制品生产质量。 |
| 英文摘要: |
| The work aims to solve the problem of large deviation between the predicted warpage position and the actual warpage position of traditional modeling methods. Warpage optimization modeling analysis of injection molded products was carried out based on Moldflow. The surface parameters of injection molded products were optimized by data simulation and pretreatment, casting system model construction and warpage process simulation based on Moldflow. Compared with the traditional modeling method, the new modeling method had smaller deviation and more accurate prediction results. In practical application, the modeling method can assist plastic parts processing plants to improve the production quality of injection molded products. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号