辛宏靖,廖敏茜,王潇汉,等.初生α相含量对TC18时效组织及力学性能的影响[J].精密成形工程,2021,13(3):143-147.
XIN Hong-jing,LIAO Min-qian,WANG Xiao-han,et al.Effect of Volume Fraction of Primary α Phase on Mechanical Property in TC18 Alloy[J].Journal of Netshape Forming Engineering,2021,13(3):143-147. |
| 初生α相含量对TC18时效组织及力学性能的影响 |
| Effect of Volume Fraction of Primary α Phase on Mechanical Property in TC18 Alloy |
| 投稿时间：2021-02-17 |
| DOI：10.3969/j.issn.1674-6457.2021.03.018 |
| 中文关键词: 初生α相 热处理 力学性能 元素再分配 |
| 英文关键词: primary α phase solution temperature mechanical property element partitioning |
| 基金项目:国家自然科学基金(51690161);东北大学“大学生创新训练计划”(200265) |
|
| 摘要点击次数: 2418 |
| 全文下载次数: 1430 |
| 中文摘要: |
| 目的 探究TC18合金中初生α相含量对时效后次生α片层形貌及力学性能的影响。方法 通过改变两相区固溶温度控制初生α相含量，观察固溶后合金元素分布及相同时效后合金的组织形貌，研究固溶温度对合金拉伸性能的影响。结果 固溶过程中发生元素再分配，固溶温度低，初生α相含量高，β基体中β稳定元素含量高，β基体稳定性强，抑制时效过程中次生α片层析出，时效强化效果弱。固溶温度高，β基体稳定性弱，促进时效过程中次生α片层析出，时效强化效果显著。结论 固溶温度升高，初生α相比例降低，即β基体稳定性降低，促使时效过程中大量次生α相析出，显著提高合金强度。 |
| 英文摘要: |
| The effect of volume fraction of primary α phase on alloy element partitioning, the morphology of secondary α lamellae and the tensile property in TC18 alloy were studied. The volume fraction of primary α phase and the morphology of secondary α lamellae were characterized and the tensile properties were tested at different solution temperatures. The results showed that element partitioning at low solution temperature led to the inhibition of α lamellar precipitation. On the contrary, the volume fraction of primary α phase decreased, and the content of β stabilizing elements in β matrix decreased with the increase of solution temperature. This resulted in a large number of secondary α phase precipitated during the aging process to enhanced the strength of the alloy. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号