许爱军,万海峰,梁春祖,等.低温钛合金材料应用现状及发展趋势[J].精密成形工程,2020,12(6):145-156.
XU Ai-jun,WAN Hai-feng,LIANG Chun-zu,et al.Application Status and Development Trend of Cryogenic Titanium Alloy[J].Journal of Netshape Forming Engineering,2020,12(6):145-156. |
| 低温钛合金材料应用现状及发展趋势 |
| Application Status and Development Trend of Cryogenic Titanium Alloy |
| 投稿时间：2020-09-15 |
| DOI：10.3969/j.issn.1674-6457.2020.06.020 |
| 中文关键词: 低温钛合金 成形工艺 低温性能 变形机理 |
| 英文关键词: cryogenic titanium alloy forming process low temperature properties deformation mechanism |
| 基金项目:装备预研领域基金(61409230408) |
|
| 摘要点击次数: 3272 |
| 全文下载次数: 1397 |
| 中文摘要: |
| 随着对深空领域的进一步探索，氢氧发动机以其大推力、高稳定性、无污染等优点受到了越来越多的重视。低温钛合金作为氢氧发动机低温结构的重要材料，直接影响着氢氧发动机的综合性能。以TA7ELI，TC4ELI，CT20为重点对象，详细介绍了低温钛合金的发展历史及研究现状，对目前各国广泛应用的低温钛合金性能进行了综合对比，同时介绍了低温钛合金在不同温度下的变形机理及失效形式。此外，对低温钛合金的主要成形工艺进行了详细论述。最后，基于以上介绍，提出低温钛合金未来应该朝着更高性能、更低成本以及开发新型成形工艺3个方向发展。 |
| 英文摘要: |
| With the further exploration of deep space, hydrogen-oxygen engine has attracted more attention due to the advantages of large thrust, high stability and no pollution. Cryogenic titanium alloy, as an important material for low-temperature structure of hydrogen-oxygen engine, directly affects the comprehensive performance of hydrogen-oxygen engine. With the emphasis on TA7 ELI, TC4 ELI and CT20, the development history and research status of cryogenic titanium alloys were introduced in detail and the properties of cryogenic titanium alloys currently used in various countries were compared comprehensively. At the same time, the deformation mechanism and failure mode of cryogenic titanium alloys at different temperature were introduced. Moreover, the forming process of cryogenic titanium alloys was summarized. Finally, based on the above introduction, it is proposed that cryogenic titanium alloys will be developed in three directions:higher performance, lower cost and development of new forming processes. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号