史学海,吕赞,胡云瑞,等.冷-热源辅助对FSW残余应力影响的数值模拟[J].精密成形工程,2020,12(2):55-60.
SHI Xue-hai,LYU Zan,HU Yun-rui,et al.Numerical Simulation for Influence of Cold and Thermal Sources on FSW Residual Stress[J].Journal of Netshape Forming Engineering,2020,12(2):55-60. |
| 冷-热源辅助对FSW残余应力影响的数值模拟 |
| Numerical Simulation for Influence of Cold and Thermal Sources on FSW Residual Stress |
| 投稿时间：2019-08-26 修订日期：2020-03-10 |
| DOI：10.3969/j.issn.1674-6457.2020.02.009 |
| 中文关键词: 搅拌摩擦焊 温差拉伸 温度场 应力场 |
| 英文关键词: friction stir welding thermal tension temperature fields stress fields |
| 基金项目:国家自然科学基金（51705339） |
|
| 摘要点击次数: 3123 |
| 全文下载次数: 2224 |
| 中文摘要: |
| 目的 采用焊接中施加冷热源辅助的方式对焊接应力进行控制，以减小焊后残余应力。方法 采用热机耦合数值模拟的方式对2024铝合金搅拌摩擦焊接过程进行仿真，研究采用焊缝两侧加热且底部激冷的温差拉伸辅助工艺降低残余应力的效果。结果 与常规工艺相比，温差拉伸时焊缝附近区域的温度梯度明显减小，焊缝区域温度峰值降低了75.3 ℃；搅拌头后方形成一个焊缝两侧温度高中间温度低的马鞍形温度场。两种工艺下的纵向残余应力峰值均位于焊缝边缘；相比于常规工艺，温差拉伸工艺下的残余应力峰值降低了23.4%。结论 冷热源辅助可以有效减小搅拌摩擦焊接头的残余应力峰值。 |
| 英文摘要: |
| The work aims to control the welding stress by applying cold and thermal sources during the welding process, so as to reduce the residual stress after welding. The friction stir welding of 2024 aluminum alloy was simulated by ther-mo-mechanical coupling numerical simulation, and the effect of thermal tension process for heating at both sides of weld and chilling at the bottom to reduce residual stress was studied. Compared with the conventional process, the temperature gradient in the area near the weld was obviously reduced during thermal tension process, and the temperature peak value in the weld area was reduced by 75.3 ℃. A saddle-shaped temperature field with high temperature on both sides of the weld and low temperature in the middle was formed behind the rotating tool. The peak value of longitudinal residual stress under both processes was located at the edge of weld. Compared with the conventional process, the peak residual stress value was reduced by 23.4% under thermal tension process. Cold and thermal sources can effectively reduce the peak value of residual stress in friction stir welding joints. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号