刘文杰,雷声.汽车纵梁成形回弹及补偿[J].精密成形工程,2019,11(3):127-132.
LIU Wen-jie,LEI Sheng.Forming Springback and Compensation of Auto Girder[J].Journal of Netshape Forming Engineering,2019,11(3):127-132. |
| 汽车纵梁成形回弹及补偿 |
| Forming Springback and Compensation of Auto Girder |
| 投稿时间：2019-04-01 修订日期：2019-05-10 |
| DOI：10.3969/j.issn.1674-6457.2019.03.015 |
| 中文关键词: AutoForm软件 回弹补偿 汽车纵梁 |
| 英文关键词: AutoForm software springback compensation auto girder |
| 基金项目:安徽省教育厅自然科学重点资助项目（kj2016A146） |
|
| 摘要点击次数: 4206 |
| 全文下载次数: 3135 |
| 中文摘要: |
| 目的 分析某型汽车纵梁的结构特点和冲压工艺性，并根据实际生产经验、条件制定多步成形工艺方案。方法 借助AutoForm有限元软件对零件进行冲压成形模拟，有效防止成形缺陷的形成，降低模具形成的风险。对于高强度钢纵梁在成形后具有较大回弹的情况，使用迭代回弹补偿方法来补偿模具的回弹。在此基础上，根据回弹补偿后的模具型面设计并加工模具。结果 经过多次回弹补偿，零件的最大回弹由补偿前的13 mm减小至±0.5 mm以内，回弹补偿效果较为显著。结论 此回弹补偿方法具有可行性并具有指导工程应用的价值。 |
| 英文摘要: |
| This paper aims to analyze structural characteristics and stamping technology of an auto girder, and formulate a multi-step forming process scheme according to the actual production experience and conditions. The stamping process of the parts was simulated with the AutoForm finite element software to avoid defects and decrease development risks of the die. For serious springback of girder of high strength steel part after deformation, the multiple iterations spring-back compensation was applied to compensate the springback of the die. On this basis, the mold was designed and processed according to die face design after springback compensation. After several times of springback compensation, the maximum springback of the parts decreased from 13 mm before compensation to within 0.5 mm. The springback compensation effect was obvious. The springback compensation method is feasible and valuable for engineering application. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号