房宇飞,宁世儒,苏建军,等.基于结构-工艺协同优化的车门外板冲压成形[J].精密成形工程,2019,11(2):22-27.
FANG Yu-fei,NING Shi-ru,SU Jian-jun,et al.Stamping and Forming of Outer Door Panel Based on Structure-process Synergistic Optimization[J].Journal of Netshape Forming Engineering,2019,11(2):22-27. |
| 基于结构-工艺协同优化的车门外板冲压成形 |
| Stamping and Forming of Outer Door Panel Based on Structure-process Synergistic Optimization |
| 投稿时间：2019-02-18 修订日期：2019-03-10 |
| DOI：10.3969/j.issn.1674-6457.2019.02.004 |
| 中文关键词: 轻量化 车门外板 铝合金 结构-工艺一体化 |
| 英文关键词: light weight outer door panel aluminum alloy structure-process integration |
| 基金项目: |
|
| 摘要点击次数: 4560 |
| 全文下载次数: 3352 |
| 中文摘要: |
| 目的 实现铝合金车门外板结构与冲压成形工艺参数的协同优化，解决零件冲压成形时破裂与过度减薄等问题。方法 从材料流动与应力分布等角度入手，对车门的尺寸和形状参数进行优化，同时利用有限元分析软件AutoForm来获取一组最优的冲压工艺参数组合，最终通过产品的工厂试制进行验证。结果 铝合金车门外板的冲压成形性大幅度提升，解决了车门外板冲压成形破裂等问题。结论 研究结果对大型车身覆盖件的结构设计与冲压工艺有重要的指导意义。 |
| 英文摘要: |
| The paper aims to solve the problems of cracking and excessive thinning during stamping and forming of parts through synergistically optimizing structure of aluminum alloy outer door panel and parameters of stamping forming process. This study optimized the size and shape parameters of the door from the perspectives of material flow and stress distribution, and used the finite element analysis software AutoForm to obtain a set of optimal stamping process parameter combinations, which were finally verified by factory trial production. The stamping formability of the aluminum alloy outer door panel was greatly improved. It solved the cracking of the door outer panel during stamping and forming. The research results have important guiding significance for the structural design and stamping process of large body panels. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号