文章摘要
王梦洁,陈苏坚,刘桂亮,等.一种同步提高压铸Al-Si-Fe合金导热性和强塑性的新方法[J].精密成形工程,2019,11(1):47-53.
WANG Meng-jie,CHEN Su-jian,LIU Gui-liang,et al.A New Method for Synchronously Improving Thermal Conductivity, Strength and Plasticity of Al-Si-Fe Alloy[J].Journal of Netshape Forming Engineering,2019,11(1):47-53.
一种同步提高压铸Al-Si-Fe合金导热性和强塑性的新方法
A New Method for Synchronously Improving Thermal Conductivity, Strength and Plasticity of Al-Si-Fe Alloy
投稿时间:2018-12-18  修订日期:2019-01-10
DOI:10.3969/j.issn.1674-6457.2019.01.008
中文关键词: Al3BCp  显微组织  力学性能  热导率
英文关键词: Al3BCp  micro-structure  mechanical properties  thermal conductivity
基金项目:国家自然科学基金重点项目(51731007)
作者单位
王梦洁 1. 山东大学 材料液固结构演变与加工教育部重点实验室济南 250000 
陈苏坚 2. 广州致远新材料科技有限公司广州 511470 
刘桂亮 3. 山东吕美熔体技术有限公司济南 250061 
刘相法 1. 山东大学 材料液固结构演变与加工教育部重点实验室济南 250000 
摘要点击次数: 4629
全文下载次数: 3335
中文摘要:
      目的 同步提高压铸Al-Si-Fe合金(Y7)的导热性和强塑性。方法 引入Al3BC粒子以实现材料改性,先研究重力铸造性能,再应用至高压压铸。结果 重力铸造条件下,引入Al3BC粒子后测得试样的平均抗拉强度(UTS)、屈服强度(YS)、伸长率(EL)、热导率(k)分别为201.74 MPa, 106.13 MPa, 11.49%, 195.2 W/(m?K),相比于未引入粒子的情况分别提高了8.4%, 9.6%, 10.8%, 2.6%。应用在压铸件上也获得了较为理想的力学性能(UTS:295 MPa;YS:220 MPa;EL:3.5%)和热导率(k=146.72 W/(m?K))。结论 纳米Al3BC粒子能够实现Y7铝合金导热性和强塑性的同步改进,是基于Al3BC粒子与α-Al基体较低的错配度以保证良好的导热性;以及弥散分布的粒子抑制共晶Si相的生长,从而达到细晶强化、弥散强化的效果。
英文摘要:
      This work aims to improve the thermal conductivity and strength and plasticity of Al-Si-Fe high pressure die casting (HPDC) aluminum alloy at the same time. Al3BC particles (Al3BCp) were used under gravity casting (named Y7 (GC)) and then used in high pressure die casting(named Y7 (HPDC)). After adding Al3BCp, the mean ultimate tensile strength (UTS), yield strength (YS), elongation (EL) and thermal conductivity (k) of Y7 (GC) was 201.74 MPa, 106.13 MPa, 11.49% and 195.2 W/(m?K) respectively, which increased 8.4%, 9.6%, 10.8% and 2.6% separately by contrasting with the alloys without adding particles. When Al3BCp applied to die casting, Y7 (HPDC) also showed more excellent tensile properties (UTS: 295 MPa; YS: 220 MPa; EL: 3.5%) and thermal conductivity (146.72 W/(m?K)). The innovative method is based on the smaller mismatch between particles and α-Al to ensure a good thermal conductivity and Al3BCp restrain the growth of eutectic silicon and particles dispersive distribution which play a role of fine grain strengthening and distribution strengthening.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第14006562位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号