魏战雷,任贵娟,李建崇,等.Ti-48Al-2Nb-2Cr合金铸造收缩特性研究[J].精密成形工程,2018,10(3):18-21.
WEI Zhan-lei,REN Gui-juan,LI Jian-chong,et al.Contraction Characteristics of Ti-48Al-2Nb-2Cr Casting Alloy[J].Journal of Netshape Forming Engineering,2018,10(3):18-21. |
| Ti-48Al-2Nb-2Cr合金铸造收缩特性研究 |
| Contraction Characteristics of Ti-48Al-2Nb-2Cr Casting Alloy |
| 投稿时间：2018-04-08 修订日期：2018-05-10 |
| DOI：10.3969/j.issn.1674-6457.2018.03.004 |
| 中文关键词: TiAl合金 熔模铸造 收缩率 |
| 英文关键词: TiAl alloy investment casting contraction rate |
| 基金项目:装备预研基金（6140922020107）；国家自然科学基金（51671026） |
|
| 摘要点击次数: 4465 |
| 全文下载次数: 3910 |
| 中文摘要: |
| 目的 研究TiAl合金铸造过程的收缩特性。方法 采用Ti4822合金，通过设计长方体、圆柱体、回字形和环形4种典型结构，开展了熔模精密铸造工艺实验。结果 基础尺寸在10~80 mm时，Ti4822合金的自由线收缩率在3.11%~2.09%之间，受阻收缩比自由收缩低30%~50%左右，同时随着基础尺寸的增加，自由线收缩量增加，而收缩率呈降低趋势。结论 收缩数据和规律的获得，为TiAl合金铸件尺寸精度控制提供了基础数据。 |
| 英文摘要: |
| In order to investigate the contraction characteristics of TiAl alloy，four kinds of typical structure were designed to carry out an experiment on investment casting process of Ti4822 alloy. The result showed that the free linear contraction rate of Ti4822 alloy was 3.11% to 2.09% when the basic dimension was 10~80 mm. Furthermore, the hindered linear contraction rate was 30%~50% lower than the free linear contraction rate. Besides, the contraction quantity increased with the improvement of basic dimension, while the contraction rate declined. The acquiring of contraction characteristics and rules provides basic data for controlling the dimension accuracy of TiAl alloy casting. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号