文章摘要
李德富,刘生璞,郭胜利.B4CP/2009Al复合材料动态再结晶临界条件[J].精密成形工程,2018,10(2):67-73.
LI De-fu,LIU Sheng-pu,GUO Sheng-li.Critical Conditions of Dynamic Recrystallization for B4CP/2009Al Composite[J].Journal of Netshape Forming Engineering,2018,10(2):67-73.
B4CP/2009Al复合材料动态再结晶临界条件
Critical Conditions of Dynamic Recrystallization for B4CP/2009Al Composite
投稿时间:2017-12-14  修订日期:2018-03-10
DOI:10.3969/j.issn.1674-6457.2018.02.012
中文关键词: B4CP/2009Al复合材料  动态再结晶  临界条件  加工硬化率
英文关键词: B4CP/2009Al composite  dynamic recrystallization  critical conditions  strain hardening rate
基金项目:国家自然科学基金(52105028)
作者单位
李德富 北京有色金属研究总院北京 100088 
刘生璞 北京有色金属研究总院北京 100088 
郭胜利 北京有色金属研究总院北京 100088 
摘要点击次数: 4615
全文下载次数: 3719
中文摘要:
      目的 研究B4CP/2009Al复合材料的热变形流变行为,确定B4CP/2009Al复合材料发生动态再结晶的临界条件。方法 采用Gleeble-1500热模拟机对体积分数为25%的B4CP/2009Al复合材料进行热压缩试验,热压缩温度为300~500 ℃,应变速率为0.001~1 s−1,并建立热变形本构方程。基于加工硬化率曲线(θ-σ),获得动态再结晶临界条件。结果 B4CP/2009Al复合材料的流变应力随温度的升高和应变速率的降低而降低。临界应力(σc)与峰值应力(σp)存在线性关系:σc=0.2992σp+22.4698,引入Zener-Hollomon参数描述变形条件对临界条件的影响,得到临界应变与Z参数的关系:εc=1.35×10−3Z0.047 39。结论 B4CP/2009Al复合材料的流变应力曲线以动态再结晶软化机制为主要特征,B4C增强颗粒的加入促进了复合材料的动态再结晶。
英文摘要:
      The paper aims to study hot deformation behaviors of B4CP/2009Al composite and confirm the critical conditions of its dynamic recrystallization. The hot compression tests of 25% B4CP/2009Al composite were conducted at deformation tem- perature of 300~500 ℃ and strain rate of 0.001~1 s−1 on a Gleeble-1500 thermal simulator. The hot deformation constitutive equation was established. Based on the strain hardening rate curves (θ-σ), the critical conditions of dynamic recrystallization were identified. The flow stress-strain of B4CP/2009Al composite decreased with the increase of temperature and the decrease of strain rate. There was a liner relationship between σc and σp: σc=0.2992σp+22.4698, and the Zener-Hollomon parameter was in- troduced to describe the effect of deformation conditions on critical conditions: εc=1.35×10−3Z0.047 39. The flow stress-strain curve of B4CP/2009Al composite shows the main characteristic of dynamic recrystallization and the addition of B4C particles promotes the dynamic recrystallization process of the composite.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第14769326位访问者    渝ICP备15012534号-4

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

    

渝公网安备 50010702501719号