文章摘要
夏龙,孙天成,姬栋超.TiB2掺杂对碳纤维增强锂铝硅复合材料抗氧化性的影响[J].精密成形工程,2018,10(2):13-17.
XIA Long,SUN Tian-cheng,JI Dong-chao.Effect of TiB2 Doping on Oxidation Resistance of Carbon Fiber Reinforced LAS Composites[J].Journal of Netshape Forming Engineering,2018,10(2):13-17.
TiB2掺杂对碳纤维增强锂铝硅复合材料抗氧化性的影响
Effect of TiB2 Doping on Oxidation Resistance of Carbon Fiber Reinforced LAS Composites
投稿时间:2017-12-15  修订日期:2018-03-10
DOI:10.3969/j.issn.1674-6457.2018.02.003
中文关键词: 锂铝硅微晶玻璃  复合材料  掺杂  TiB2  抗氧化性
英文关键词: LAS glass ceramics  composites  doping  TiB2  antioxidation
基金项目:国家自然科学基金(51302050);航天创新基金
作者单位
夏龙 哈尔滨工业大学(威海) 材料科学与工程学院山东 威海 264209 
孙天成 哈尔滨工业大学(威海) 材料科学与工程学院山东 威海 264209 
姬栋超 哈尔滨工业大学(威海) 材料科学与工程学院山东 威海 264209 
摘要点击次数: 4706
全文下载次数: 3762
中文摘要:
      目的 研究含有不同质量分数的TiB2的Cf/LAS复合材料的抗弯强度变化规律。方法 以碳纤维、TiB2、硝酸锂、硝酸铝、硅溶胶和氨水为主要原料,采用溶胶凝胶法结合浆料浸渍-热压烧结工艺,制备了加入TiB2的碳纤维增强锂铝硅微晶玻璃(LAS)复合材料Cf/LAS(TiB2),利用XRD、FTIR、万能材料试验机、SEM等对Cf/LAS(TiB2)复合材料的性能和微观结构进行研究。结果 TiB2的质量分数为1%, 3%, 5%, 9%的Cf/LAS(TiB2)复合材料,在1000 ℃热处理30 min后的强度保留率分别为2.9%, 29.1%, 44.0%, 50.0%。结论 材料的强度保留率随TiB2含量的增多而上升,因此Cf/LAS(TiB2)复合材料的抗氧化性随着TiB2含量的增加而增强。
英文摘要:
      The paper aims to study change rules of flexural strength after doping different mass of TiB2 in Cf / LAS composites. With carbon fiber, TiB2, lithium nitrate, aluminum nitrate, silica sol and ammonia as the main raw materials, sol-gel method combined with hot pressing sintering process was used to prepare TiB2 carbon fiber reinforced LAS composites Cf/LAS(TiB2). Properties and microstructure of Cf/LAS(TiB2) composites were investigated by XRD, FTIR, universal material testing machine and SEM. The strength retention rates of Cf/LAS(TiB2) composites with TiB2 content of 1%, 3%, 5%, and 9% after heat treatment at 1000 ℃ for 30 min were 2.9%, 29.1%, 44.0 %, and 50.0%. The strength retention of the material increases with the increase of TiB2 content. The oxidation resistance of Cf/LAS(TiB2) composites increases with the increase of TiB2 content.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第14790005位访问者    渝ICP备15012534号-4

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

    

渝公网安备 50010702501719号