郭良刚,王凤琪,梁磊,等.高性能环件辗轧成形智能仿真优化新思路与研究进展[J].精密成形工程,2017,9(4):1-11.
GUO Liang-gang,WANG Feng-qi,LIANG Lei,et al.New Idea and Advances in Intelligent Simulation and Optimization of High-performance Ring Rolling Process[J].Journal of Netshape Forming Engineering,2017,9(4):1-11. |
| 高性能环件辗轧成形智能仿真优化新思路与研究进展 |
| New Idea and Advances in Intelligent Simulation and Optimization of High-performance Ring Rolling Process |
| 投稿时间：2017-05-17 修订日期：2017-07-10 |
| DOI：10.3969/j.issn.1674-6457.2017.04.001 |
| 中文关键词: 高性能环件辗轧 智能仿真优化 大型铝合金环件 超大型筒节环件轧制 环轧工艺路径 目标驱动 |
| 英文关键词: high-performance ring rolling intelligent simulation and optimization supersized aluminum alloy ring supersized cylinder ring rolling rolling paths target driving |
| 基金项目:国家自然科学基金（51575448, 51135007） |
|
| 摘要点击次数: 4656 |
| 全文下载次数: 3889 |
| 中文摘要: |
| 面对环件辗轧成形过程有限元计算效率极低和成形成性难以一体化调控的挑战，提出了环件辗轧智能建模仿真优化的新思路和新方法。该方法能在有限元计算过程中，实现各轧辊运动的实时协调匹配和基于目标驱动的自动调控，只需要一次有限元计算就可直接获得满足控制量（环件长大速度、轧制力、温度、组织性能等）目标要求的环轧工艺路径；简介了超大型铝合金环件(10 m级)双向辗轧智能建模仿真、超大型筒节环件轧制智能建模仿真、基于力控的大型铝合金环件（5 m级）双向辗轧工艺路径智能仿真优化、基于温控的铸坯环件双向辗轧工艺路径智能仿真优化4个方面的最新研究进展。 |
| 英文摘要: |
| To solve challenges of extremely low FE calculation efficiency and integrated control on shaping and performance, the paper proposed a new idea and method for intelligent simulation and optimization of ring rolling process. By this method, the motions of various rolls could be driven in real time during the FE analysis by the control targets of controlling variables, such as growth speed of ring, rolling force, temperature and microstructure. Thus the rolling paths obtained could directly meet the control requirements of controlling variables only by one FE calculation. Some advances in intelligent modeling and simulation of radial-axial rolling of supersized (10 m) aluminum alloy ring, supersized cylinder ring rolling, radial-axial rolling driven by rolling force of large (5 m) aluminum alloy ring, and radial-axial rolling driven by temperature of as-cast billet were introduced briefly. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号