刘汉雄,王若,李向华.微小型齿轮片连续冲、修工艺[J].精密成形工程,2017,9(3):48-50.
LIU Han-xiong,WANG Ruo,LI Xiang-hua.Continuous Punching-Finishing Process of Micro-Miniature Gear Pieces[J].Journal of Netshape Forming Engineering,2017,9(3):48-50. |
| 微小型齿轮片连续冲、修工艺 |
| Continuous Punching-Finishing Process of Micro-Miniature Gear Pieces |
| 投稿时间：2017-04-12 修订日期：2017-05-10 |
| DOI：10.3969/j.issn.1674-6457.2017.03.010 |
| 中文关键词: 微小型齿轮片 冲、修工艺 坯、料复位 机加铣齿 |
| 英文关键词: micro-miniature gear pieces punching-finishing process blank-material back locating gear machining |
| 基金项目: |
|
| 摘要点击次数: 4659 |
| 全文下载次数: 3699 |
| 中文摘要: |
| 目的 以冲压代替机加，提高零件加工的良品率和加工效率。方法 用模具进行连续冲、修加工。结果 生产效率提高1倍，零件加工良品率提高20%，生产成本下降25%。结论 用模具进行连续冲、修可以代替机加铣齿加工，为微小型齿轮片的加工开辟了一条新的途径。 |
| 英文摘要: |
| The paper aims to replace machining with stamping to improve the quality and efficiency of the parts processing. Continuous stamping and finishing were carried out for dies. The productivity was doubled; the quality of the parts was improved by 20%; and the production cost was reduced by 25%. Replacing gear machining with continuous stamping and finishing of dies develops a new way for the processing of micro-miniature gear pieces. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号