叶益民,朱强,雷玉成.一种高精度航空轴承内孔加工专用夹具[J].精密成形工程,2017,9(2):95-97.
YE Yi-min,ZHU Qiang,LEI Yu-cheng.A High Precision Special Fixture for Aero-bearing Inner Hole Machining[J].Journal of Netshape Forming Engineering,2017,9(2):95-97. |
| 一种高精度航空轴承内孔加工专用夹具 |
| A High Precision Special Fixture for Aero-bearing Inner Hole Machining |
| 投稿时间：2017-02-23 修订日期：2017-03-10 |
| DOI：10.3969/j.issn.1674-6457.2017.02.019 |
| 中文关键词: 航空轴承 内孔加工 专用夹具 |
| 英文关键词: aero-bearing inner hole machining special fixture |
| 基金项目: |
|
| 摘要点击次数: 4602 |
| 全文下载次数: 3555 |
| 中文摘要: |
| 在保证航空轴承原来精度的情况下，重新加工一相配轴承的内孔。设计一套专用夹具，分为夹具主体和压板2 部分，既要能保证磨削后的内孔与原来轴承内孔的同心度，又能保证与原轴承端面的垂直度。采用该夹具加工了轴承的内孔，达到了理想的精度。用以上方法加工后的轴承经用户验收，装上飞机部件后，各项指标均合格。 |
| 英文摘要: |
| The paper aims to remachine a new type of inner hole to match the bearing on the premise of guaranteeing the previous precision of aviation bearing. A special fixture composed of body splint and pressure plate was designed, which could ensure both the concentricity between the inner hole after grinding and the previous inner hole, and the verticality to previous end face of bearing. Ideal precision of the inner hole of bearing was achieved by using this fixture. Bearings manufactured by this method are accepted by customers. All indexes are qualified after being installed into the airplane. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号