丁少行,伞晓刚,高世杰,等.激光精跟踪快速控制反射镜结构优化与分析[J].精密成形工程,2017,9(2):87-90.
DING Shao-hang,SAN Xiao-gang,GAO Shi-jie,et al.Structural Optimization and Analysis of Fast Steering Mirror for Laser Fine Tracking[J].Journal of Netshape Forming Engineering,2017,9(2):87-90. |
| 激光精跟踪快速控制反射镜结构优化与分析 |
| Structural Optimization and Analysis of Fast Steering Mirror for Laser Fine Tracking |
| 投稿时间：2017-02-13 修订日期：2017-03-10 |
| DOI：10.3969/j.issn.1674-6457.2017.02.017 |
| 中文关键词: 快速控制反射镜 结构优化 有限元仿真分析 轻量化 |
| 英文关键词: fast steering mirror structural optimization finite element simulation analysis lightweight |
| 基金项目: |
|
| 摘要点击次数: 5403 |
| 全文下载次数: 3721 |
| 中文摘要: |
| 目的 对快速控制反射镜进行结构优化与处理，获得满足设计要求的轻量化结构。方法 选取合适的加工材料，建立以结构柔度最小为目标的优化数学模型进行拓扑优化，对优化后提取的结构模型进行处理和有限元仿真分析。结果 通过优化与分析，确定了反射镜最终结构，模拟分析结果表明，镜面最大变形量为2.7 nm，基频为4130.3 Hz，均满足设计要求。优化前后相比，结构质量降低了57.8%。结论 优化结果较好满足了设计要求，对于类似结构的设计具有一定的参考作用。 |
| 英文摘要: |
| To get the lightweight structure of fast steering mirror to meet design requirements through structural optimization and treatment. The appropriate processing material was selected. The optimization mathematical model was established with minimizing the structural flexibility as the optimization objective. New model after optimizing was studied by numerical simulation analysis. The reasonable structure was obtained through optimization and analysis. Results showed that the maximum deformation of the mirror reached 2.7 nm and the fundamental frequency was 4130.3 Hz, both of which sufficed requirement of the design. The structural weight was lower by 57.8% after optimization than before. The results of optimization are satisfactory, which can be used as reference for the design of similar structures. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号