刘光辉,刘百宣,刘华,等.双法兰式三阀组阀体多向精密成形工艺[J].精密成形工程,2017,9(2):58-62.
LIU Guang-hui,LIU Bai-xuan,LIU Hua,et al.Multi-direction Precision Forming Technology of Double Flanges Tri-valve Set Body[J].Journal of Netshape Forming Engineering,2017,9(2):58-62. |
| 双法兰式三阀组阀体多向精密成形工艺 |
| Multi-direction Precision Forming Technology of Double Flanges Tri-valve Set Body |
| 投稿时间：2017-02-28 修订日期：2017-03-10 |
| DOI：10.3969/j.issn.1674-6457.2017.02.011 |
| 中文关键词: 双法兰式三阀组阀体 多向精密成形 数值模拟 工艺试验 |
| 英文关键词: double flanges Tri-Valve Set body multi-direction precision forming numerical simulation process text |
| 基金项目:郑州市科技重大专项资金（152PZDZX007） |
|
| 摘要点击次数: 4778 |
| 全文下载次数: 3580 |
| 中文摘要: |
| 目的 研究双法兰式三阀组阀体多向精密成形工艺。方法 根据双法兰式三阀组阀体的结构特点，提出其多项精密成形工艺方案。采用Deform-3D 有限元分析软件，对提出的工艺方案进行数值模拟，分析载荷-行程曲线、金属流动规律等，最后进行工艺试验。结果 多向精密成形工艺方案可在模具许用应力范围内成形双法兰式三阀组阀体，工艺试验获得的锻件充填饱满，所获数据与模拟结果基本一致。结论 双法兰式三阀组阀体多向精密成形工艺是可行的，对实际生产及其他相似零件具有指导意义。 |
| 英文摘要: |
| The paper aims to research multi-direction precision forming technology of double flanges Tri-Valve set body. Based on structural characteristics of double flanges Tri-Valve set body, a multi-direction precision forming technology was proposed to have numerical simulation through Deform-3D software of finite element analysis. In this process, the load-stroke curve, the metal flow law, etc. were analyzed. The process experiment was also carried out. The multi-direction precision forming technology could form a double flanges Tri-Valve Set body at allowed stress. Forge pieces obtained in the process experiment were filled fully. Data obtained were basically in line with the simulation result. The proposed multi-direction precision forming technology for double flanges Tri-Valve set body is practical. It has guiding significances for the actual production and other similar parts. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号