刘鲁铭,王忠堂,刘立志.AZ31 镁合金压痕-压平复合形变数值模拟[J].精密成形工程,2017,9(2):34-39.
LIU Lu-ming,WANG Zhong-tang,LIU Li-zhi.Numerical Analysis of Indenten-flatten Compound Deformation Technology of AZ31 Magnesium Alloy[J].Journal of Netshape Forming Engineering,2017,9(2):34-39. |
| AZ31 镁合金压痕-压平复合形变数值模拟 |
| Numerical Analysis of Indenten-flatten Compound Deformation Technology of AZ31 Magnesium Alloy |
| 投稿时间：2017-03-01 修订日期：2017-03-10 |
| DOI：10.3969/j.issn.1674-6457.2017.02.006 |
| 中文关键词: AZ31 镁合金 压痕-压平复合形变 数值模拟 |
| 英文关键词: AZ31 magnesium alloy IFCDT numerical simulation |
| 基金项目:国家自然科学基金（51575366） |
|
| 摘要点击次数: 4778 |
| 全文下载次数: 3488 |
| 中文摘要: |
| 目的 研究AZ31 镁合金压痕-压平复合形变过程中工艺参数对形变区温度场、应力场、应变场、塑性变形力的影响规律。方法 采用有限元模拟软件，对复合形变过程进行数值模拟研究，获得不同工艺参数条件下，温度场、应力场、应变场、塑性变形力的变化规律。结果 在压痕形变过程中，随着形变温度的增大，形变区温度场的最高温度随之增大，最大塑性变形力的随之减小。在压痕形变过程中，随着模具温度的增大，形变区温度场的最高温度随之增大，最大塑性变形力随之减小。结论 实验结果与数值模拟结果相吻合，说明数值模拟过程中的几何模型及相关参数设定是合理的。 |
| 英文摘要: |
| The paper aims to study the influence law of technological parameters on temperature field, stress field, strain field and deformation force in deformation zone during indenten-flatten compound deformation technology (IFCDT) of AZ31 magnesium alloy. A finite element simulation software was adopted to simulate and research the process of compound deformation to obtain change rules of temperature field, stress field, strain field and deformation force at different technological parameters. During deformation process of IFCDT, with the increase of deformation temperature, the highest temperature in deformation zone increased, and the maximum deformation force decreased. With the increase of the die temperature, the highest temperature in deformation zone increased, and the maximum plastic deformation force decreased. The experimental results are in agreement with that of simulation. Settings of geometric model and relevant parameters in the numerical simulation are reasonable. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号