储火,石小岗.螺栓轴力超声波测量技术中残余轴力的测量方法[J].精密成形工程,2017,9(1):119-124.
CHU Huo,SHI Xiao-gang.Test Methods for Residual Bolt Tension by Using Ultrasonic Technique[J].Journal of Netshape Forming Engineering,2017,9(1):119-124. |
| 螺栓轴力超声波测量技术中残余轴力的测量方法 |
| Test Methods for Residual Bolt Tension by Using Ultrasonic Technique |
| 投稿时间：2017-01-03 修订日期：2017-01-10 |
| DOI：10.3969/j.issn.1674-6457.2017.01.021 |
| 中文关键词: 螺栓 超声波 残余轴力 |
| 英文关键词: bolt ultrasonic residual bolt tension |
| 基金项目: |
|
| 摘要点击次数: 4531 |
| 全文下载次数: 3909 |
| 中文摘要: |
| 为了研究超声波测量技术中残余轴力测量方法，基于螺栓轴力超声波飞行时间特性曲线，提出一种无需拆卸螺栓的特性曲线法，并与目前实验室常用的将螺栓拆卸后测量残余变形的拆卸法进行了实验比较。特性曲线法能够很好地应用于螺栓残余轴力监测，其测量精度与拆卸法相当，较真实残余轴力值偏小。 |
| 英文摘要: |
| In order to analyze the test methods for residual bolt tension by using ultrasonic technique, a Property Curve Method based on the bolt tension and ultrasonic flight time curve is introduced. Tests are conducted to compare the results of Property Curve Method with that of Disassembling Method, which is usually used in laboratory. According to experimental results, Property Curve Method can be used in vary situations and has reasonable accuracy with Disassembling Method. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号