赵建刚.盒形件成形工艺分析[J].精密成形工程,2016,8(6):80-84.
ZHAO Jian-gang.Forming of the Rectangular Box[J].Journal of Netshape Forming Engineering,2016,8(6):80-84. |
| 盒形件成形工艺分析 |
| Forming of the Rectangular Box |
| 投稿时间：2016-08-31 修订日期：2016-11-10 |
| DOI：10.3969/j.issn.1674-6457.2016.06.015 |
| 中文关键词: 拉伸 盒形件成形 工艺参数 拉伸模结构 润滑剂 |
| 英文关键词: drawing box stamping technological parameter drawing die structure lubricant |
| 基金项目: |
|
| 摘要点击次数: 4220 |
| 全文下载次数: 3751 |
| 中文摘要: |
| 目的 分析盒形件的成形规律，解决盒形件的成形问题。方法 对毛坯展开料、拉伸次数、压边圈的选用、模具等几个主要参数及拉伸零件所需的冲床规格进行计算，制订加工工艺方案。分析零件在拉伸过程中有可能出现的皱痕、划痕、拉断等问题，从而采取合适的润滑剂。结果 以典型盒形件为例，进行试加工，零件尺寸100%合格，零件表面质量良好。 结论 通过工艺参数计算原则及润滑剂的选用，能够保证盒形件的尺寸精度、表面质量，提高生产效率。该方法对类似零件的工艺计算和分析有一定的参考价值。 |
| 英文摘要: |
| This work aims to analyze the forming law of box parts and solve the problem of box forming. Major parameters like blank unfolding material, number of drawing, selection of blank holder and die and the specifications of punch required by drawing process were calculated to formulate a machining process plan. Problems like crinkle, scratch and breakage in drawing were analyzed so that proper lubricant could be adopted. With a typical box as an example, the trial processing was carried out. Part size was 100% qualified and part surface had good quality. In conclusion, the calculation principles of technological parameters and the selection of lubricant can guarantee the dimension precision and surface quality of box parts and improve production efficiency. This method has certain reference value for the calculation and analysis of the technology of similar parts. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号