郎利辉,刘康宁,张文尚,等.板材/管材柔性介质成形工艺新进展[J].精密成形工程,2016,8(5):15-22.
LANG Li-hui,LIU Kang-ning,ZHANG Wen-shang,et al.New Development on Sheet/Tube Flexible Medium Forming Technology[J].Journal of Netshape Forming Engineering,2016,8(5):15-22. |
| 板材/管材柔性介质成形工艺新进展 |
| New Development on Sheet/Tube Flexible Medium Forming Technology |
| 投稿时间：2016-06-23 修订日期：2016-09-10 |
| DOI：10.3969/j.issn.1674-6457.2016.05.003 |
| 中文关键词: 板材/管材充液成形 柔性介质成形 成形装备 模具设计技术 |
| 英文关键词: tube/sheet hydroforming flexible medium forming forming equipment mold-design technology |
| 基金项目:国家自然科学基金（51511130041） |
|
| 摘要点击次数: 4175 |
| 全文下载次数: 3562 |
| 中文摘要: |
| 随着先进轻量化技术的不断发展，难变形复杂薄壁类构件在航空航天、汽车等领域的应用日益广泛，以板材/管材柔性介质成形工艺为代表的先进塑性成形技术受到了越来越多的关注。介绍了柔性介质成形工艺的最新研究进展，包括了以面向成形过程的板材/管材性能试验测试手段、成形极限预测及起皱性能预测等为代表的基础理论研究进展，国内外充液成形装备及生产线研究进展，基于充液成形技术的模具设计技术研究进展，最后对颗粒介质成形工艺进行了简要介绍。 |
| 英文摘要: |
| With the development of advanced lightweight manufacturing technologies, the application of complex thin-walled components made of difficult-to-deformation materials has become increasingly popular in manufacturing areas such as aviation, aerospace and automobile industry. Among the advanced manufacturing technologies, the sheet/tube flexible medium forming process has attracted more and more attention. In this paper, the new development of sheet/tube flexible medium forming technology has been reviewed. The fundamental research of sheet/tube material’s performance test aiming at the plastic forming process, prediction of the forming limit and wrinkling has been included. The current state-of-art of forming equipment and mold-design techniques for hydroforming process is also discussed. Finally, recent research on the granular medium forming technique is briefly reviewed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号