袁博,王天宝,沙莉,等.HONDA “H” 标志实物测量与反求造型[J].精密成形工程,2016,8(3):85-88.
YUAN Bo,WANG Tian bao,SHA Li,et al.HONDA"H" Marker Real Model Measurement and Reverse Modeling[J].Journal of Netshape Forming Engineering,2016,8(3):85-88. |
| HONDA “H” 标志实物测量与反求造型 |
| HONDA"H" Marker Real Model Measurement and Reverse Modeling |
| 投稿时间：2016-03-15 修订日期：2016-05-10 |
| DOI：10.3969/j.issn.1674-6457.2016.03.019 |
| 中文关键词: 反求工程 三坐标测量 3D打印 |
| 英文关键词: reverse engineering coordinate measuring 3D printing |
| 基金项目: |
|
| 摘要点击次数: 4805 |
| 全文下载次数: 3555 |
| 中文摘要: |
| 研究汽车标志反求工程中， 快速数据采集、 数据格式转换和处理的方法。以CATIA V5为数据处理及特征模型软件， 日本FUJIOKA公司生产的BK-1500型三坐标测量机、 Renishaw测头及随机测量系统 （3 Dimensional Graph Measure System） 软件KCMM-PLUS为基础， 对本田CR-V2.4越野车前格栅HONDA “H” 标志建立实物造型模型。提出用反求工程进行点、 线、 面数据采集， 数据格式转换和处理， 实现了实物测量与造型反求， 为3D打印技术提供了前期指导。 |
| 英文摘要: |
| The aim of this study was to investigate fast data acquisition， data format conversion and application processing in Flag Automobile Reverse Engineering.Using CATIA V5 as data processing and feature modeling software，BK-1500-type coordinate measuring machine produced by FUJIOKA，and KCMM-PLUS software of Renishaw probe and random measurement system， the physical model of Honda CR -V2.4 SUV front grille HONDA "H" was established.As a results， point， line and surface data acquisition， data processing and format conversion were proposed， so as to realize the physical measurement and reverse modeling， providing an initial guide for the 3D printing technology. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号