徐笑,樊黎霞,王亚平,等.身管径向精锻锻后织构分析及性能各向异性研究[J].精密成形工程,2016,8(2):15-21.
XU Xiao,FAN Li-xia,WANG Ya-ping,et al.Texture Component of Barrel after Radial Forging and the Aeolotropism of Material Property after Forging[J].Journal of Netshape Forming Engineering,2016,8(2):15-21. |
| 身管径向精锻锻后织构分析及性能各向异性研究 |
| Texture Component of Barrel after Radial Forging and the Aeolotropism of Material Property after Forging |
| 投稿时间：2016-01-07 修订日期：2016-03-10 |
| DOI：10.3969/j.issn.1674-6457.2016.02.004 |
| 中文关键词: 身管径向锻造 织构分析 各向异性 |
| 英文关键词: radial forging of barrel research of texture aeolotropism |
| 基金项目: |
|
| 摘要点击次数: 4487 |
| 全文下载次数: 3775 |
| 中文摘要: |
| 目的 从细观尺度， 研究某30SiMn2MoVA材料5.8 mm口径身管径向精锻成形的锻后性能。方法 通过X射线衍射 （XRD） 实验分析了锻后身管， 绘制了极图和取向分布函数(ODF)图， 最后利用分析所得主要织构成分， 基于广义胡克定律和Schmid定律研究了锻后弹性模量和屈服强度的各向异性， 并与实验结果进行了对比。结果 锻后身管材料存在纤维织构， 主要织构成分为{111}<1 1 2>， 次要织构成分为{111}<110>； 这两种织构成分对锻后弹性各向异性没有影响， 但主要织构成分使得锻后屈服强度具有各向异性。结论 身管径向精锻工艺， 使得材料屈服强度存在从轧向至横向逐渐降低的各向异性。 |
| 英文摘要: |
| In order to study the properties of 30SiMn2MoVA 5.8 mm-caliber barrel after radial forging in meso-scale，XRD experiment was used to analyze the barrel after forging to draw pole figures and orientation distribution function (ODF) figures. At last，on the basis of texture component we had analyzed，Hooke law and Schmidt law were used to analyze the effects of main texture component on barrel material′s modulus of elasticity aeolotropism and yield strength aeolotropism. Then，the results were compared with experiment. The barrel after forging existed fiber textures，the main texture was {111} <1 1 2> and the secondary texture was {111} <110>. These two textures had no effects on barrel material′ s modulus of elasticity aeolotropism，but the main texture made the phenomenon of yield strength aeolotropism on barrel after forging. Radial forging of barrel made the yield strength of material reducing gradually from rolling direction to lateral direction. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号