赵宾,李向博,王久林,等.微量 Sc 对高强铝合金铸态组织性能的影响[J].精密成形工程,2015,7(6):70-75.
ZHAO Bin,LI Xiang-bo,WANG Jiu-lin,et al.Influence of Micro-Sc on Casting Microstructures and Mechanical Properties of High Strength Aluminum Alloy[J].Journal of Netshape Forming Engineering,2015,7(6):70-75. |
| 微量 Sc 对高强铝合金铸态组织性能的影响 |
| Influence of Micro-Sc on Casting Microstructures and Mechanical Properties of High Strength Aluminum Alloy |
| 投稿时间：2015-09-10 修订日期：2015-11-10 |
| DOI：10.3969/j.issn.1674-6457.2015.06.011 |
| 中文关键词: 稀土 Sc 高强铝合金 铸态组织性能 元素分布 |
| 英文关键词: RE-Sc high strength aluminum alloy casting textures and property element distribution |
| 基金项目:安徽省科技攻关重大项目(1301021006) |
|
| 摘要点击次数: 4350 |
| 全文下载次数: 4056 |
| 中文摘要: |
| 目的 研究 Sc 对某 7 系铝合金铸态组织性能以及对合金主要元素分布情况的影响。 方法在某 7 系铝合金中添加微量 Sc,采用金相显微镜、硬度测试等实验方法,研究了合金铸态组织与性能;通过 SEM 和 EDS 分析了合金主要元素分布情况。 结果 添加 0. 2% 的 Sc 的合金,晶粒尺寸从106 μm 细化到 41 μm;Sc 的添加使硬度得到了一定程度的改善,增大了 Cu 元素的枝晶偏析,而对合金基体中 Zn 和 Mg 等合金元素枝晶偏析影响不大。 结论 添加微量 Sc,可以得到细小、圆整、均匀的铸态组织,合金主要元素的分布也得到改善。 |
| 英文摘要: |
| The aim of this study was to investigate the effect of Sc on the microstructure and the distribution of the main elements of the alloy in a 7 series aluminum alloy. After addition of Micro-Sc in a 7 series Aluminum alloy, the microstructure and properties of the 7 series Al alloy was investigated by means of optical microscope and hardness test. The distribution of major elements of the alloy was analyzed by SEM and EDS. The grain size of the alloy containing 0. 2%Sc was refined from 106 μm to 41 μm. The addition of Sc improved the hardness and increased the dendrite segregation of Cu element, and had little effect on the dendrite segregation of Mg and Zn in the alloy. The small, round and uniform cast structure can be obtained by addition of Sc and the distribution of major elements of the alloy was also improved. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号