赵志翔,田晓柯,唐瑶瑶.双孔壳体正反挤压成形工艺[J].精密成形工程,2015,7(5):120-124.
ZHAO Zhi-xiang,TIAN Xiao-ke,TANG Yao-yao.Forming Process of Double-hole Shells by Direct-backward Extrusion[J].Journal of Netshape Forming Engineering,2015,7(5):120-124. |
| 双孔壳体正反挤压成形工艺 |
| Forming Process of Double-hole Shells by Direct-backward Extrusion |
| 投稿时间：2015-07-30 修订日期：2015-09-10 |
| DOI：10.3969/j.issn.1674-6457.2015.05.020 |
| 中文关键词: 等温成形 正反双孔 正反挤压 横向剪断 |
| 英文关键词: isothermal forming direct-backward double holes direct-backward extrusion transverse shear |
| 基金项目: |
|
| 摘要点击次数: 3966 |
| 全文下载次数: 3491 |
| 中文摘要: |
| 目的 设计双孔壳体成形工艺方案,生产出合格产品。 方法 运用数值仿真方法,模拟双孔壳体成形过程,分析其成形趋势、应变图和应力图等,为工艺设计提供理论支撑。 结果 通过模拟仿真计算,优化和验证了双孔壳体挤压工艺方案的可行性和合理性。 结论 通过工艺方案分析、有限元模拟计算,确定了双孔壳体最终成形方案,并且制作出了合格的产品。 |
| 英文摘要: |
| The aim of the study was to design a process of forming double-hole shells and manufacturing qualified products. By numerically simulating the forming process of double-hole shells, the forming tendency, strain and stress diagrams were analyzed to provide a theoretical support for the process design. The viability and rationality of double-hole shells extrusion process were optimized and verified by simulation and calculation. In conclusion, by process scheme analysis and finite element simulation and calculation, the final scheme for forming of double-hole shells was confirmed, and qualified products were manufactured. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号